Question about tranny bearing...
#11
Re:Question about tranny bearing...
Also replace the pilot bearing as well. These usually come in a clutch kit. Pressure Plate/Clutch disc/Throwout bearing (aka release bearing) Pilot bearing and a clutch alignment tool.
How many miles is on this trans.. I wouldnt be suprised if its a input bearing.
Also look to see if any fluids are on the ground. Does the cluch slip. If yes its the input bearing. The bareing kit caust 150-250. Or u can buy them one at a time from honda.
A good shop will take it appart for nothing. But make u pay to put together.
How many miles is on this trans.. I wouldnt be suprised if its a input bearing.
Also look to see if any fluids are on the ground. Does the cluch slip. If yes its the input bearing. The bareing kit caust 150-250. Or u can buy them one at a time from honda.
A good shop will take it appart for nothing. But make u pay to put together.
#12
Re:Question about tranny bearing...
I charge $100 including parts ($40) to replace ISB, seal, and both washers.
You just have to bring the tranny (not in car!) to me.
(Trying to stir up business, no job, tranny side work is paying bills)
You just have to bring the tranny (not in car!) to me.
(Trying to stir up business, no job, tranny side work is paying bills)
#13
Re:Question about tranny bearing...
Originally Posted by AbaZ
Eh maybe.... Alot of the time it can be a Input shaft Bearing (also called clutch housing bearing). Located inside of the transmission. I've replaced a few on D-series trannys.
Thread
Thread Starter
Forum
Replies
Last Post
traff1c
Hybrid/Tech
5
07-16-2007 03:31 AM
jhmcrx
Forced Induction
10
05-24-2005 10:59 PM