prelude 3 rd gen turbo
#14
Re: prelude 3 rd gen turbo
you can use F22/H23 rods and for the pistons you can use P72 (B18C) but you will have to bore the piston pin from 21mm to 22mm to make it work. Ok noob thier's your answer now post some Dam ****
#15
Re: prelude 3 rd gen turbo
Originally Posted by dams
Hello , I am French,
I am owner of a prelude b20a7(b20a5) turbo With internal stock.
My engine to death, I would do it again.
I would like to know that I can adapt a Piston(b16,b18,etc...),the connecting rods(h23?), and other internal parts.
Manufacturer?
b20a5 there is compatible with any of the other B-series?
thanx you for this responses and sorry my bad english.
I am owner of a prelude b20a7(b20a5) turbo With internal stock.
My engine to death, I would do it again.
I would like to know that I can adapt a Piston(b16,b18,etc...),the connecting rods(h23?), and other internal parts.
Manufacturer?
b20a5 there is compatible with any of the other B-series?
thanx you for this responses and sorry my bad english.
Jesus ------- Christ.
Swap a H motor in it.... Dont ---- with the B20. Its a headgasket popping shitty block.
Ask Ba4turbo on here...
LOL.
#16
Re: prelude 3 rd gen turbo
thanks you for the response
sorry but I am going to speak french
en faite je recherche des piston basse compression pour mon b20a7 car les piston d'origine ne tienne pas ,c'est le deuxieme jeux que je fais!le probleme c'est que cr le plus bas que j'ai trouver est 9:1 et je voudrais au moins 8.5:1 et les seul que j'ai trouver sont en b18,c'est pour ca que je voulais savoir si il y avait possibilité de les monter ou de monter autre chose,je recherche aussi les ressort de soupape et soupapes renforcé ainsi que le joint de culasse renforcé,etc...
a vrai dire j'ai pas trouver grand chose
apres le swap h22 me dirais mais niveau budget c'est pas réalisable,et meme si je trouve pas ce qu'il me faut au niveau pieces moteur a un budget abordable je serait obliger de stoper mon projet lude turbo,ce qui est dommage car a ma connaissance en france il n'y a qu'une seul prelude turbo et c'est la mienne :P(on se demande pourquoi!)
enfin bon c'est la vie !maintenant si vous avais une astuce pour m'aider je suis preneur
si quelqu'un se sent le gout de traduire car il y en a que mon anglais fait rire(et je les comprend),je l'en remercie d'avance.mais ce qui ce moquer qu'il parle un peut francais que je vois leur niveau!lol!
je vous remercie tous pour vos reponsse
sorry but I am going to speak french
en faite je recherche des piston basse compression pour mon b20a7 car les piston d'origine ne tienne pas ,c'est le deuxieme jeux que je fais!le probleme c'est que cr le plus bas que j'ai trouver est 9:1 et je voudrais au moins 8.5:1 et les seul que j'ai trouver sont en b18,c'est pour ca que je voulais savoir si il y avait possibilité de les monter ou de monter autre chose,je recherche aussi les ressort de soupape et soupapes renforcé ainsi que le joint de culasse renforcé,etc...
a vrai dire j'ai pas trouver grand chose
apres le swap h22 me dirais mais niveau budget c'est pas réalisable,et meme si je trouve pas ce qu'il me faut au niveau pieces moteur a un budget abordable je serait obliger de stoper mon projet lude turbo,ce qui est dommage car a ma connaissance en france il n'y a qu'une seul prelude turbo et c'est la mienne :P(on se demande pourquoi!)
enfin bon c'est la vie !maintenant si vous avais une astuce pour m'aider je suis preneur
si quelqu'un se sent le gout de traduire car il y en a que mon anglais fait rire(et je les comprend),je l'en remercie d'avance.mais ce qui ce moquer qu'il parle un peut francais que je vois leur niveau!lol!
je vous remercie tous pour vos reponsse
#18
Re: prelude 3 rd gen turbo
Originally Posted by dams
thanks you for the response
translated by google:
I actually search for low compression piston for my b20a7 because the original piston does not take Angry is the second game that I do! The problem is the lowest cr I find is 9: 1, and I would like at least 8.5:1 and the only that I find are b18, for ca I wanted to know if there was opportunity to climb up or else, I also search the spring strengthened valves and valve and the cylinder head gasket strengthened ...
A fact I did not find much Cry
After the swap h22 level, but I would say the budget is not feasible, and even if I am not what I need at engine pieces have a budget affordable I would oblige to stop my project lude turbo, which is a shame because to my knowledge there has france only a prelude turbo, and it's mine Tongue (we wonder why!)
Finally, it's the good life! Now if you had a trick to help me I am taker Wink
If someone feels the eye and translate because there are that my English laugh (and I understand), I thank him in advance. This but what a laugh that he speaks French can I see their standard! lol!
I thank you all for your reponses
translated by google:
I actually search for low compression piston for my b20a7 because the original piston does not take Angry is the second game that I do! The problem is the lowest cr I find is 9: 1, and I would like at least 8.5:1 and the only that I find are b18, for ca I wanted to know if there was opportunity to climb up or else, I also search the spring strengthened valves and valve and the cylinder head gasket strengthened ...
A fact I did not find much Cry
After the swap h22 level, but I would say the budget is not feasible, and even if I am not what I need at engine pieces have a budget affordable I would oblige to stop my project lude turbo, which is a shame because to my knowledge there has france only a prelude turbo, and it's mine Tongue (we wonder why!)
Finally, it's the good life! Now if you had a trick to help me I am taker Wink
If someone feels the eye and translate because there are that my English laugh (and I understand), I thank him in advance. This but what a laugh that he speaks French can I see their standard! lol!
I thank you all for your reponses
what I got was that the h22 swap is out of the budget... and you want to lower your compression for the turbo.
#20
Re: prelude 3 rd gen turbo
Si votre moteur est en assez bonne forme, que renforcer jusqu'à ce qu'il décède. À ce moment-là vous aurez beaucoup appris sur la voiture et le turbocompresseur tel. Un H22 serait méchant dans cette petite voiture, donc mon .02 cents serait d'économiser votre argent et emprunter cette voie lorsque le moteur prend un poo