Re: PLEASE HELP!! Oil light came on tonite, don't know why.
metal shavings= bad, just be sure to correct the problem on your next motor, so it doesn't happen again
|
Re: PLEASE HELP!! Oil light came on tonite, don't know why.
this motor isnt totally gone, if i was to put rod bearings in and a new oil pump, timing belt and water pump it should run good?
|
Re: PLEASE HELP!! Oil light came on tonite, don't know why.
go get a z6 longblock for a couple hundie...check your journals on the crank, but chances are they are toast too
|
Re: PLEASE HELP!! Oil light came on tonite, don't know why.
well i have a spare z6 block, i guess ill be using that with the d15b head and boosting it
|
Re: PLEASE HELP!! Oil light came on tonite, don't know why.
Originally Posted by gsand
Too much oil is alot worse than having low oil.
When the oil level is high, the crankshaft travels through the oil on its rotation, and froths it up bad. Once the oil starts to froth, it becomes hard for the pump to pick it up, and the oil thins right out and doesnt do a very good job :1 |
Re: PLEASE HELP!! Oil light came on tonite, don't know why.
Originally Posted by d15bsnail
this motor isnt totally gone, if i was to put rod bearings in and a new oil pump, timing belt and water pump it should run good?
|
Re: PLEASE HELP!! Oil light came on tonite, don't know why.
a friend of mine drove his CRX 205 km/h in 4th gear some time. and did this almost every weekend. last week he heard a ticking sound. it was 1 rod bearing. it was broken, he replaced it the next day, drove 1000km and 1 week later the same sound came back, now he replaced all 4 of them.
you can see on the color of the damaged bearing that its fucked (or scratches). new should B gray- aluminium color. old is a brown color. he was lucky his crack was still good. |
Re: PLEASE HELP!! Oil light came on tonite, don't know why.
how far is 205km is miles? cause i drove no more than 4-5 miles in 4th going about 35-40
|
Re: PLEASE HELP!! Oil light came on tonite, don't know why.
i made it about 30 miles with a serious knock before the engine wouldnt run. the crank was fuxored:)
|
Re: PLEASE HELP!! Oil light came on tonite, don't know why.
exactly same thing happened to me, i had to change my crank pulley cause someone dropped it on the floor during my rebuild and it had cracked.. i went on and bought a cheaper one which was much lighter than stock the motor was rebuil i used it for a couple of days and one day the oil light came on and i took apart the oil pan to find lots of small metal shavings in the oil, what made the light go on was that thing that sucks the oil from the pan to the pump was getting completely filled with the metal shavings and the pump couldnt suck enough oil. changed the crank pulley with a stock one balanced it cleaned the inside but it could stand for only a month before minor knocking started...
i rebuilt it again and no problem at the moment... my advice dont use crappy, cheap crank pulleys and if you plan to use a good and lightened one make sure you get it balanced.. |
All times are GMT -5. The time now is 05:10 AM. |
© 2024 MH Sub I, LLC dba Internet Brands