OLDER TEG D series?
I was wondering what the older integra D16 was like.. the DOHC ? a kid i know has a Teg with a blown motor.. and will give away the car and motor for FREE ....even if i can LEARN something from it... But i would like to find out the Basic info on the DOHC D series. never heard a thing about it .
|
Re: OLDER TEG D series?
D16A....?
|
Re: OLDER TEG D series?
Originally Posted by Del Slow 1
D16A....?
|
Re: OLDER TEG D series?
if it's free then go get and tear it apart and learn alil something. Hell you could even make some money from it like the pistons and rods are nice oem upgrade high compression pistons. Cams you could send to like Delta or Web to get regrinds for cheap and sell those. Oil you could tap and sell so those not wanting to tap your own for a turbo setup or just for a replacement on JDM dohc zc's. As far as swapping that engine into a 88+ civic don't waste your time cause it's not worth it it's only good for swapping into older crx's which are a complete bolt.
|
Re: OLDER TEG D series?
what year is it? if it is free go for it.
|
Re: OLDER TEG D series?
plenty of info out there look up d16a1 in google youll find all you want to know
|
Re: OLDER TEG D series?
Originally Posted by Del Slow 1
FREE
Look around or ask around, you could find a cheap 1st gen ZC motor for cheap... I found one a year or two ago for a 100. Complete longblock, I woulda picked it up, but I didn't have a 1st gen integ/crx/civic. So yeah, snatch that ---- like a forty of ole E. |
Re: OLDER TEG D series?
correct me if i am wrong(which i'm not) but didn't a1 come in the 2g crx/4g civic si and the motor in the 1g teg was a d16 a6/browntop zc
|
Re: OLDER TEG D series?
Originally Posted by turbo_tracker
correct me if i am wrong(which i'm not) but didn't a1 come in the 2g crx/4g civic si and the motor in the 1g teg was a d16 a6/browntop zc
a1 on the 1g teg. 86-87 brown top. big rods, slight dome pistons. 88-89 black top. similiar to zc. smaller rods, higher dome pistons. |
Re: OLDER TEG D series?
Originally Posted by turbo_tracker
correct me if i am wrong(which i'm not) but didn't a1 come in the 2g crx/4g civic si and the motor in the 1g teg was a d16 a6/browntop zc
|
Re: OLDER TEG D series?
1gen teg motor: D16a1- similar to ZC but not the same, diffternt cams, and compression ratio,
looks like a ZC, but wont bolt directly into 4th gen civic or 2gen CRX chassis, will however swap to a 1gen CRX or 3gen civic chassis though. D16a1: 118hp. DOHC ZC: 129hp. |
Re: OLDER TEG D series?
Originally Posted by ForceFedZC
1gen teg motor: D16a1- similar to ZC but not the same, diffternt cams, and compression ratio,
looks like a ZC, but wont bolt directly into 4th gen civic or 2gen CRX chassis, will however swap to a 1gen CRX or 3gen civic chassis though. D16a1: 118hp. DOHC ZC: 129hp. I had an '87 D16A1 in the old 86 CRX Si. Thing was as fast as the pigslut 99-00 Si's were stock - the riceboys hated me. |
Re: OLDER TEG D series?
power to weigh is everything
a stock 99 si is barely faster than a DA teg |
All times are GMT -5. The time now is 09:38 PM. |
© 2024 MH Sub I, LLC dba Internet Brands