ok i broke a ring or ring land b20b.... so im swaping in ls update pics carnage
 

ok so i blew my ---- tonight 4th gear pull i had some knock.. O0 1-2-3 was tits many times then i decided to do a 4th to see how high i can get the boost up and lower end rpms.. pos i guess i didnt pull off enough timing down there cuz i ran 1.5deg/psi retard then took off2 deg off the top and added more fuel..


so my offical question is im gonna get a ls block to put under my b16 head.. witch oil pump should i run or all b pumps are the same as far as housing and gears go.. my b20b is obd2 motor i can tell by the cfk sensor..

#2 whats a safe boost/hp # on with out having to get arp head studs..

heres my bin

Re: ok i broke a ring or ring land b20b.... so im swaping in ls
 

idk if you really did that you pulled a shitload of timing mabey 2much what were your afr to much heat on stock ---- ftl

Re: ok i broke a ring or ring land b20b.... so im swaping in ls
 

it happened when i was just comming into a good boost in 4th this is a gsr trans.. it was about 4500 rpm.. or so and i think i heard a slight knock.. oh well im swaping in my ls out of the rex

Re: ok i broke a ring or ring land b20b.... so im swaping in ls
 

wat size injectors do u have. it shows u got the fuel pretty much maxed out. :S

Re: ok i broke a ring or ring land b20b.... so im swaping in ls
 

Are using stock 240cc's?? You can up the fuel all you want in crome, but aint gonna work out. fo fitties.

Re: ok i broke a ring or ring land b20b.... so im swaping in ls
 

im using 450's and a mazda 626 turbo fuel pump :1 ugh i hate to use the word NOOB but you asked for it down load my bin and look at it

this is that pump vs stock
Attachment 14079


also heres a update.. i was busy most of the day but this wat i got so far

ls pulled from my crx in under 2 hours thats a O0 record for me.. some one can probly beat that.

Attachment 14080

Re: ok i broke a ring or ring land b20b.... so im swaping in ls
 

I looked at your map in crome and there is a ---- load of fuel and very little timing compared to any of the basemaps Ive seen (xenocrons site).

Re: ok i broke a ring or ring land b20b.... so im swaping in ls
 

so why did it kaboom.. look at the advanced options... fuel and timming correction i advanced them in cold.. maybe iat messed up who knows...

Re: ok i broke a ring or ring land b20b.... so im swaping in ls
 

bad injectors etc basic things happen still. Bin maps arent everything

Re: ok i broke a ring or ring land b20b.... so im swaping in ls
 

yep sounds like mabey injector got stuck open wash and melt let us see carnage

Re: ok i broke a ring or ring land b20b.... so im swaping in ls
 

i say yyall speack bunch or nagerrum


i havent taken that ----- apart yet was gonna do it today but looks like no till monday or maybe tomorrow morning will see..
heres some funny ---- sucks its not the original sound is ofset.. i was lafing so hard i started to cry lol
http://www.youtube.com/watch?v=SAemi_mh9u8

Re: ok i broke a ring or ring land b20b.... so im swaping in ls update pics carn
 

http://i248.photobucket.com/albums/g...P1050600-1.jpg


Attachment 14030



Attachment 14031


Attachment 14032


Attachment 14033


Attachment 14034

Re: ok i broke a ring or ring land b20b.... so im swaping in ls update pics carnage
 

That sucks, Time to throw in some vitaras and some tt rods and let the mbc go to the nig-nog setting :y

Re: ok i broke a ring or ring land b20b.... so im swaping in ls update pics carnage
 

Did you really say pwnd? I've never heard anyone actual SAY it in real life.

Re: ok i broke a ring or ring land b20b.... so im swaping in ls update pics carn
 

yes i said pwned!!!! >:D

any way what im doing is

i just bought some b20b pistons on stock rods 69$

new rings 31$

hone cylinders 40$

new mls HG 18$

once all this ---- comes it will be running!!!



my futur build would be to use my b18b1 block i have

forged pistons /eagle rods

arp head studs


nig nog setting on the MBC O0

Re: ok i broke a ring or ring land b20b.... so im swaping in ls update pics carnage
 

all obd2 oil pumps are the same! so any thing 96+ will be good. and yes you should run one of these or a older vtec pump the ls motors don't have the same flow or volume I guess I should say. as far as stock head bolts holding. I had my ls up around 14psi with the stock bolts and ebay head gasket that I coper sprayed. held fine.

Re: ok i broke a ring or ring land b20b.... so im swaping in ls update pics carn
 

so i should shim it to get more pressure since (this) pump flows good but has low pressure cuz it was on a motor not meant to rev any higher than 6800 or so and im taking it to 7700, well i was when it did run..

i took it apart the bearings look really worn out yet no scratch on the crank just one little tiny one that i cant feel with my nail..