oil question
07-08-2003, 09:48 PM
#1
1.0 BAR
Thread Starter
Join Date: Dec 2002
Posts: 341
oil question
ok i buliding a b16 with a t3 turbo. i have a B&M oil cooler kit for my car now with my stock oil pan will it be enough to push it or not. should i go with morso or stock. if i can go with stock i would like to if not i guess i have to go with aftermarket. also my car is going to be lower an 1" if that helps.
07-09-2003, 07:34 AM
#2
3.0 BAR
Join Date: Feb 2003
Posts: 9,089
Re:oil question
Are u asking if the extra volume given by the oil cooler will require you to have more oil in your car hense a bigge, morso pan?
What I would do is fill up the Manufactures amount. unplug the EFI fuse and crank it over a bit. to prime the oil system. Then check oil level. If its still up within operating area then I would say its ok.
What I would do is fill up the Manufactures amount. unplug the EFI fuse and crank it over a bit. to prime the oil system. Then check oil level. If its still up within operating area then I would say its ok.
Thread
Thread Starter
Forum
Replies
Last Post
iluvmysh
Forced Induction
5
03-05-2005 01:30 AM
