HomemadeTurbo - DIY Turbo Forum - OBX LSD bearings ?'s

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)

- Hybrid/Tech (https://www.homemadeturbo.com/hybrid-tech-8/)

- - OBX LSD bearings ?'s (https://www.homemadeturbo.com/hybrid-tech-8/obx-lsd-bearings-s-89482/)

Re: OBX LSD bearings ?'s

Quote:

Originally Posted by Mista Bone

do 50+ LSD installs and it's not hard.

But to a newbie is seems like a black art :) O0

u'd can do a good write-up though ^-^

Re: OBX LSD bearings ?'s

Got my trans together and with the bearings on, Used a mallot and used the Balance shaft pulley to use as a spacer to mallot them on. HEPLFUL TIP FOR THE H AND F GUYS. Got the LSD in and the trans together with a .65 shim tolerance. HT played helpful " sorry NEegrooos" but it any who, it's together and when I put into neutral and spin the shaft its clean no knocking or resistance. SHWEEEW........ Bone thanks again and the -----BOR FREIGHT would not take a return "ON SALE" bolting the trans to the block tomorrow and going to wait till next week for the snow to melt to do several 180's and then drain and put a 30/70 blend of lucas/HONDA ATF fluid in it. AND BDVT I got the RP fluids on stas by after the motor is in and the whole set-up is reasy to fire up

JUST TO LET YOU -----S KNOW

WE are in a BLIZZARD EFFECT WARNING in INDIANA got a meeer 7 inches. weather forecasters are so wrong on the Boob tube. Snow drifts are a MO FO. has to drive the 9mpg Bronco

Re: OBX LSD bearings ?'s

Level three here Hamilton County/Cincy, not allowed on the roads.

Just like 30 years ago. I LOVE IT!

Re: OBX LSD bearings ?'s

Quote:

Originally Posted by widebody93

bolting the trans to the block tomorrow and going to wait till next week for the snow to melt to do several 180's and then drain and put a 30/70 blend of lucas/HONDA ATF fluid in it. AND BDVT I got the RP fluids on stas by after the motor is in and the whole set-up is reasy to fire up

No need to do that start off with a dirty second out of the driveway and its broke in