nonvtec dist on vtec motor
 

got everything i need to get ride movin except the damn distributor. and of course bank account is like a vegas hooker,blown out. read somewhere you take mod a non vtec dist to run on a vtec motor. using a d15b7 obd1 one dist on a d16z6 w/ y8 head. someone clarify me on this.

Re: nonvtec dist on vtec motor
 

don't worry about all the vtec/nonvtec ----. It's just about the foot pattern on the dist that matters. I'm using a nonvtec obd2 dist on a p28. I'm gonna mod my b7 dizzy to work on my LS head.

Re: nonvtec dist on vtec motor
 

not sure on the y8, on a z6 with a b7: the foot pointing at the vtec solenoid will be amputated. the hole on top will be extended. the leg facing to the front of the engine will be notched.
you can mock it up to see.

Re: nonvtec dist on vtec motor
 

sweet nothing internal then.

Re: nonvtec dist on vtec motor
 

Nope just have to enlargen the holes to get full timing you will see what Im talking baout when you line the dist on the head nothin serious a dremel tool cant fix

Re: nonvtec dist on vtec motor
 

or a ------ springfield 1911 a1 45 wont ------ handle.
http://rds.yahoo.com/S=96062883/K=sp...ngfield_7a.jpg

Re: nonvtec dist on vtec motor
 

We had a OBD1 ZC distributor work on a B16..
We cut off all the mounting points and welded new ones and the thing that sticks in the cam..we had to take it of and put it back 180 degree turned.
Cause when it was at TDC the rotor was pointing to the sparkplug wire for cylinder #4.

Re: nonvtec dist on vtec motor
 

is that a dohc zc?

Re: nonvtec dist on vtec motor
 

Hell as long at that part of the dist goes into the end of the cam your set. It's just the foot pattern that is just the difference. How did you get past the cam angle sensor since the dist for the dohc zc don't have them?

Re: nonvtec dist on vtec motor
 

The B7 and Y8 dizzys are the same. The only one that is gay is the Z6. It has a wider mounting points. But the internals are the same. You can take a B7 apart and put it in a Z6 dizzy housing... considering that the Z6 is bad, or vice versa.