when i pull from 0 km/h , and i release the pedal clutch , there are a noise as if it be the axles ... ago a long time a guy said that it could be a throw out bearing but im not sure what is it... and how can i to replace it (i dont know what name it has in spanish neither)

what do you think?

noise is like a " CLUCK!" or something like that ..

 

That could be 100 different things. More info in is needed.

 

My clutch pedal used to squeak... Are you sure it isnt that?

 

If the noise happens when you are first starting off (first start moving) it is probly the pilot bearing not the throw out.
The throw out bearing will make noise when you push the pedal IN, and will keep making noise as long as it is pushed in,
it usually makes a growling noise instead of a screech or "Cluck"
The Pilot bearing supports the input shaft when torque is applied through the drive train. It helps to keep everything centered.

BTW, If your car makes a squeaking noise when idleing and it goes away as soon as you touch the clutch pedal...it's the fork moving around where the Throw out bearing hooks to it. If you grease on the ends of the fork where it holds the bearing, ( can only be done with the trans out) it will not squeak like this.

 

thank you brother, i will try to do a vid about the noise.. and i think that yes, could be pilot bearing..

 

Axle CV joints maybe.. sounds like a No movement to movement noise..

 

sound when engage clutch with engine.. much times but not always .... when i did remplace the pads ago a long time.. i had to raise the car of course , i to turn and make the noise , it seem that there are a space until the engine engage with tranny , i hope you understand..