no power in 4th and 5th gear
i have just finished my engine build and i am having some problems.
the engine is a d16z5 head mated to a zc1 block with zc1 pistons (pg6 i think) i am running a t3 from an peugeot 505 not sure of the a/r. for fuel managment ive just got an fmu its bad, i know. thae engine pulls real hard at second and third gear, but when i shif to forth it starts pulling up to about 4500rpm an loses its power. fith is even worse. thing is it is reading 8 psi at the guage efter 3000rpm in all gears. thinking maby its my tranny sinse it a dx tranny but not sure. anybody gor some idias on this. thanks |
Re: no power in 4th and 5th gear
no power or LOW power.
not sure what size the turbo is but with a smaller turbo power does die out on higher rpm. and it would happen if yoru clutch is slowly going out. |
Re: no power in 4th and 5th gear
well the power is low in 4th and fith, when i hit about 140 kmh it starts losing its omf.
i had an t25 before but on a complete d16z5 engine. and that diliverd in 4th and 5th almost all the way to 200kmh. the new engine doesent do 200kmh its limit is 185 or somting. wery stange ??? |
Re: no power in 4th and 5th gear
Perhaps a bigger turbo is in order?
|
Re: no power in 4th and 5th gear
maybe you're leaning out or running too rich once there is more load on the engine?
|
Re: no power in 4th and 5th gear
Originally Posted by warrick
maybe you're leaning out or running too rich once there is more load on the engine?
|
Re: no power in 4th and 5th gear
running a high pressure pump with that fmu?
|
Re: no power in 4th and 5th gear
Deposit the FMU in the trash. You shouldn't be doing 5th gear pulls with an FMU.
|
All times are GMT -5. The time now is 10:19 PM. |
© 2024 MH Sub I, LLC dba Internet Brands