HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Hybrid/Tech (https://www.homemadeturbo.com/hybrid-tech-8/)
-   -   new fuel problem thread *updates* (https://www.homemadeturbo.com/hybrid-tech-8/new-fuel-problem-thread-%2Aupdates%2A-44192/)

Cray91 08-09-2005 03:06 AM
new fuel problem thread *updates*
 
Car gives a "fuel delivery system" CEL.

I have gotten it narrowed down to full throttle situations only. I can drive around at partial throttle, and it won't come onmost times.

I have a Y8 in a 94 EX civic. Only thing not Y8 is the TB, which is a OBD0 LS with a Z6 wheel on it. MAP sensor is OBDI, mounted to the firewall. No problems there.

IAT is still hanging out, havn't mounted it to the intake pipe yet. but connected still, so I doubt that would make a code go off.

Replaced fuel lines in the engine bay and fuel filter. Checked all gaskets and seals related to the fuel rail. Nothing out of the ordinary.

Only things I can think of are FPR.

Anyone ever have this CEL, and what ended up being the problem for you?

civicvtecb16a 08-09-2005 06:57 AM
Re: new fuel problem thread *updates*
 
Ive had this before, swapped the 02 and it went away :D

Cray91 08-09-2005 05:18 PM
Re: new fuel problem thread *updates*
 
The 02 is about a year old. So I doubt that it is that, but I will give it a try with a used one.

HMTguy 08-09-2005 05:30 PM
Re: new fuel problem thread *updates*
 
I still have the fpr from my b7, if you would like to try it just send me $5 and I'll ship it right out to you.

daubleaaron 08-11-2005 04:17 PM
Re: new fuel problem thread *updates*
 
ive got a fpr off a z6, you can give it a try if you want.

djfob 08-11-2005 06:53 PM
Re: new fuel problem thread *updates*
 
problems like this suck since all you can do is keep replacing stuff till it's fixed......try the fpr then look into the injectors

whiterice 08-12-2005 12:56 AM
Re: new fuel problem thread *updates*
 
Originally Posted by hoggy
Code 43 gets thrown when the ECU has to correct more than a certain percentage to get the o2 sensor to fluctuate correctly.

I've had it come on for two reasons. One was a bad o2 sensor. The car was seeing lean conditions from the o2 sensor so it was dumping more fuel than necessary to get to what it thought was stoich.

Second was the fuel map was way too rich and the ecu couldn't correct enough so it threw a code 43.

stillnoturbo 08-12-2005 02:48 AM
Re: new fuel problem thread *updates*
 
What fpr are you using cray? The stock y8 one or something else? The SOHC FPR are rated higher then nonvtec FPR incase you didn't know. Hmmmm go buy a adj fpr and see if that works. If it doesn't help out then at least you have one now for that bling factor. :P


All times are GMT -5. The time now is 03:13 AM.


© 2024 MH Sub I, LLC dba Internet Brands