HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Hybrid/Tech (https://www.homemadeturbo.com/hybrid-tech-8/)
-   -   NEW!! Codes 10 and 15 (https://www.homemadeturbo.com/hybrid-tech-8/new-codes-10-15-a-31403/)

crxrx7 12-11-2004 07:17 PM

NEW!! Codes 10 and 15
 
Well I got a new ecu and now it is giving me new codes. I had a PR4 and now I have a PM6. The first in intake air temp sensor. The next is Ignition output signal. I don't know what the IOS code means or what to do about fixing it. I think my car hates me. And I think I hate it.

Guy-Fast 12-11-2004 08:58 PM

Re:NEW!! Codes 10 and 15
 
buy some weber carbs and be done with the codes

crxrx7 12-11-2004 09:33 PM

Re:NEW!! Codes 10 and 15
 
No guys I am serious. This thing is pissing me off. I need help.

Guy-Fast 12-12-2004 04:00 AM

Re:NEW!! Codes 10 and 15
 
You have gotten like every code in the book. IAT's never go bad from what I have xperinced and the only time I got that code is when I switched the iacv for iat clip has they are the same

crxrx7 12-12-2004 11:47 AM

Re:NEW!! Codes 10 and 15
 
Well I did some searching and this is what I have found. Some people get just code ten. They put a new dizzy on it and it fixes it or they get code 15 and 10. New dizzy fixes it. So we will see if that works.

turboboy 12-12-2004 01:30 PM

Re:NEW!! Codes 10 and 15
 
i just finished my b16 swap and got code 10 (checked the iat, it was all fucked up)...and i also dont get any spark (but no other codes), so now i need to try a new dizzy

crxrx7 12-12-2004 02:41 PM

Re:NEW!! Codes 10 and 15
 
Yeah do that or just get a new coil and Ignition control module. Thats what they call it at the parts store. we call it the ignitor. All together it will cost $100. Thats what I am doing. But just try the ignitor first to see if that fixes it then try the coil. I have to wait till tursday to get the ignitor though so I can't tell you if that fixed it yet.

Guy-Fast 12-12-2004 04:44 PM

Re:NEW!! Codes 10 and 15
 
Dude iat code is not going to come from a dist. This is where a multimeter is needed. Follow instructions in checking for shorts my thick chiltons has all that info.

crxrx7 12-12-2004 07:13 PM

Re:NEW!! Codes 10 and 15
 
Yeah I have s chilton also but I have code 15 and I wan tot see if that takes care of the dizzy. Who knows what is wrong with the IAT sensor. I did nothing except put a new ecu in there.

crxrx7 12-13-2004 11:13 PM

Re:NEW!! Codes 10 and 15
 
Well I got a new igniton module controler for my dizzy. Is that the same as an ignitor or is the ignitor wire go to this. I have no clue for I have no spark still. Let me know. Other wise I am getting a new car


All times are GMT -5. The time now is 12:35 AM.


© 2024 MH Sub I, LLC dba Internet Brands