new car new problems
01-01-2007, 10:01 AM
#1
1.5 BAR
Thread Starter
Join Date: Dec 2005
Posts: 1,427
new car new problems
well i got a new hatch to use as a DD for a while, but last night it started to have some problems
its a 91 Si with a built (eagle rods, Je pistons, etc) B16 with a nitrous kit (i havent used it)
last night it ran great, drove it for about an hour and a half, and the only problem would be a low idle and sometimes dieing when comeing to a stop, not that big a deal... i figure can always raise the idle to temp fix that
but on my way home after about half an hour it started bogging anytime the gas was under 1/2 throttle, anything above and it would drive like normal... i was slowing to a stop to turn off towards my town and rev'd it to keep it from dieing and accidently hit 4K, came to a stop, took off, and the problem was gone. it drove just like before, no dead spots in the throttle
it has a cel which im going to check right now, but was wondering if maybe anyone had any ideas on why it would start and then stop that all of a sudden
any help is appriated, i dont really want ANOTHER car that i have to rip my hair out over
its a 91 Si with a built (eagle rods, Je pistons, etc) B16 with a nitrous kit (i havent used it)
last night it ran great, drove it for about an hour and a half, and the only problem would be a low idle and sometimes dieing when comeing to a stop, not that big a deal... i figure can always raise the idle to temp fix that
but on my way home after about half an hour it started bogging anytime the gas was under 1/2 throttle, anything above and it would drive like normal... i was slowing to a stop to turn off towards my town and rev'd it to keep it from dieing and accidently hit 4K, came to a stop, took off, and the problem was gone. it drove just like before, no dead spots in the throttle
it has a cel which im going to check right now, but was wondering if maybe anyone had any ideas on why it would start and then stop that all of a sudden
any help is appriated, i dont really want ANOTHER car that i have to rip my hair out over
01-01-2007, 03:56 PM
#3
1.5 BAR
Thread Starter
Join Date: Dec 2005
Posts: 1,427
Re: new car new problems
throwing a code 10 if im reading it right.. i looked at the little LED on the ecu cover and it was one long blink, like a 5 second pause, then another, and on like that
i looked up codes and it says IAT, would that cause how it was running last night? even if it seems random?
i looked up codes and it says IAT, would that cause how it was running last night? even if it seems random?
never had one and its not where the one on my Z6 is
01-02-2007, 10:54 AM
#6
1.0 BAR
Join Date: Jul 2005
Posts: 254
Re: new car new problems
So finally got it working? Was the TPS enrich huhz. Anyways...try looking at the plug behind your ITM it should be the one in the back there. Not the mapsensor though...maybe you have the two sensors in the back switched up? Could be causing that problem.
