need some help with codes
08-25-2006, 12:49 AM
#12
1.5 BAR
Thread Starter
Join Date: Dec 2005
Posts: 1,427
Re: need some help with codes
Originally Posted by chris
iacv plug switched with iat plug
22 check ground
20 is a result of a shitty ground
22 check ground
20 is a result of a shitty ground
im fairly certin i dont have the plugs switched but i'll try it out, and i'll go over my grounds again tomorrow as well
i've had the 14 and 22 since i put the motor back in the car, but 20 is new, just came about the day i posted this topic.. could a ground have wiggled loose?
08-25-2006, 01:06 AM
#13
0.0 BAR
Join Date: Dec 2002
Posts: 0
Re: need some help with codes
Originally Posted by Anubis_4_99
bam thank you! this is the kinda info i was looking for
im fairly certin i dont have the plugs switched but i'll try it out, and i'll go over my grounds again tomorrow as well
i've had the 14 and 22 since i put the motor back in the car, but 20 is new, just came about the day i posted this topic.. could a ground have wiggled loose?
im fairly certin i dont have the plugs switched but i'll try it out, and i'll go over my grounds again tomorrow as well
i've had the 14 and 22 since i put the motor back in the car, but 20 is new, just came about the day i posted this topic.. could a ground have wiggled loose?
code 2o comes when you have multiple codes and ground problems
code 22 is usually 99 percent of the time a result of a bad ground on the pressure switch
check your wiring and your golden
Thread
Thread Starter
Forum
Replies
Last Post
Darkelvis
General Discussion
1
07-07-2006 10:12 PM
