need help with mini me
well i have a a a6 and i have a z6 and a d15vtec head which one is better
and what do i need to do to make the swap work anything special let me know any info helps |
Re: need help with mini me
im 99% sure there is no difference between the z6 and d15 vtec head and if there is it is the cam. unless of course its the daul stage d15 vtec head which would be baller... or lame.
|
Re: need help with mini me
D15 Vtec is 1.5l, Z6 is 1.6l. Diff is in the block not the head from what i remember but dont quote me on that.
|
Re: need help with mini me
so do all the water and oil holes from the block and head the same
|
Re: need help with mini me
yes its all the same
|
Re: need help with mini me
dont forget to remove the oil jet, look for write ups online. im sure you dont feel like taking the head back off after you get it all together.
|
Re: need help with mini me
well ive been looking for write ups but no luck where is the oil jet located and how do u remove it or if u can find the write ups it would help as well thanks all
|
Re: need help with mini me
heres a link but the pics dont seem to be working, they worked a few weeks ago
http://faq.ef-honda.com/index.php?si...&id=22&lang=en |
Re: need help with mini me
The oil jet is inbetween and just right about cyl 2-3 Just take a screw and screw it into it and pull it out. Thats about all there is differnt than a regular head swap. Minus wiring up vtec. But IMO i wouldnt waste my time with this swap. Ive done it and noticed very little gain. But hell if you got the head already then gofor it
Oh and if you use the z6 head you need the z6 dizzy. |
Re: need help with mini me
so that means i cant use the obd0 dizzy from my si right
in other words i have to change the car to obd1 |
All times are GMT -5. The time now is 03:35 AM. |
© 2024 MH Sub I, LLC dba Internet Brands