My Mini-Me Run like a DX Motor any suggestion????
 

I running a Y7/Y8 Setup in a 93 DX couple. My car runs like a regular DX motor, a friend of mine did the same thing and his runs better and his car is a 95 ex. I though that since mine's a DX it should of been faster. I even race my buddy and I almost couldn't keep up with him... What's WRONG with my setup????? HELP......

Re: My Mini-Me Run like a DX Motor any suggestion????
 

wiore your vtec. you sound like a lame ass ricer. do some research before you make yourself look stupid

Re: My Mini-Me Run like a DX Motor any suggestion????
 

I'm using a P28 ECU and all the proper wire is hooked up already. The VTEC kicks at 4,800 RPM and when the VTEC kicks it feels like its weaker then a regular sohc vtec. It feels like its not getting enough air.

Re: My Mini-Me Run like a DX Motor any suggestion????
 

How's your timing and is this on a stock ecu?

Re: My Mini-Me Run like a DX Motor any suggestion????
 

i didnt know you could even feel vtec on a single cam

Re: My Mini-Me Run like a DX Motor any suggestion????
 

Did you do the swap correctly.
Does your ignition timing reads correctly?
Is your caming timing set correctly.
did you remove the oil jet from the block when u did the swap.

Re: My Mini-Me Run like a DX Motor any suggestion????
 

where is the oil jet from the block located?

Re: My Mini-Me Run like a DX Motor any suggestion????
 

In the block ;) It's in between the two middle cylinders, when you've got the head off you'll see it.

Re: My Mini-Me Run like a DX Motor any suggestion????
 

jus put nos, you'll beat ur friend... or if ur starving of air, throw on a turbo kit... that always add's more air.

Re: My Mini-Me Run like a DX Motor any suggestion????
 

i have the same proplem but i think if you have a dx tranny that why you feel like it weak as hell do a compression test and if i remeber right the y7 doesn't have oil jet