nos_boi

I running a Y7/Y8 Setup in a 93 DX couple. My car runs like a regular DX motor, a friend of mine did the same thing and his runs better and his car is a 95 ex. I though that since mine's a DX it should of been faster. I even race my buddy and I almost couldn't keep up with him... What's WRONG with my setup?? HELP......

hotrex

wiore your vtec. you sound like a lame *** ricer. do some research before you make yourself look stupid

nos_boi

I'm using a P28 ECU and all the proper wire is hooked up already. The VTEC kicks at 4,800 RPM and when the VTEC kicks it feels like its weaker then a regular sohc vtec. It feels like its not getting enough air.

tranceminister

How's your timing and is this on a stock ecu?

Jcushing

i didnt know you could even feel vtec on a single cam

Donald125

Did you do the swap correctly.
Does your ignition timing reads correctly?
Is your caming timing set correctly.
did you remove the oil jet from the block when u did the swap.

nos_boi

where is the oil jet from the block located?

tranceminister

In the block It's in between the two middle cylinders, when you've got the head off you'll see it.

turboDA6

jus put nos, you'll beat ur friend... or if ur starving of air, throw on a turbo kit... that always add's more air.

Snail Oto

i have the same proplem but i think if you have a dx tranny that why you feel like it weak as hell do a compression test and if i remeber right the y7 doesn't have oil jet