mini me swap runnin 17.7 WTF? helppp...
#1
mini me swap runnin 17.7 WTF? helppp...
well i just made my 90 crx dx.. .into a si then did the mini me swap all at one time.. .and took it to the drag strip the clutch slips a lil in second but im gonna fix that but it only ran a 17.7 is there somethin i need to do maybe an adjustalbe came gear? i didnt mess with the timin much put it where the book says the belt should be.. didnt advance it or anything.. and when i get on it .. the car runs rich.. when its idling it runs lean... im pissed.. put a lil money in the car and its slow as hell!!
#2
Re:mini me swap runnin 17.7 WTF? helppp...
reasons are
(1)you didn't hook the ---- up right
(2)you can't drive for ----
there are so much ---- involve that causes your car to run slow. Perhaps take it to a dyno and you'll see if it's really running fine rather then sitting in front of your computer getting pissed off?
Jeff-
(1)you didn't hook the ---- up right
(2)you can't drive for ----
there are so much ---- involve that causes your car to run slow. Perhaps take it to a dyno and you'll see if it's really running fine rather then sitting in front of your computer getting pissed off?
Jeff-
#4
Re:mini me swap runnin 17.7 WTF? helppp...
17.7 ouch, pretty embarresing.. I would definatly check your setup out, your car has to be running like ---- to pull a time like that. Dyno tuning is a good way to get some power.
Jeff
Jeff
#7
Re:mini me swap runnin 17.7 WTF? helppp...
well the clutch was slippin bad when u hit second and the engine sounds good as ---- when it revs the vtec and everything... checked compression its 150+ psi each cyl... i read somewhere before somethin about puttin ur timin belt a tooth advaced or some ----.. . maybe thats it? or an adjustable timing gear? and i was workin on it and tryin to find out what the deals was not just sittin in front of my pc gettin pissed off.. just tryin to think of a game plan...
#8
Re:mini me swap runnin 17.7 WTF? helppp...
correct me if im wrong...but when people talk about advancing there timing...they mean the distributor. cuz when i used to have my zc i ran a freakin 17.2 and i fixed the cam alignment(one tooth on the exhaust cam) and all the sudden(after improving my driving skills a lil) ran a 15.6.
Dane
Dane