mini-me swap
10-10-2003, 12:23 AM
#3
1.0 BAR
Join Date: Jan 2003
Posts: 624
Re:mini-me swap
use the vtec timing belt. then the dist. that the head came with. then wire the vtec...1 ground and 2 power to ecu. the use a vtec ecu for that year car. but if its an obd2 which i know that motor came from, then i'd suggest converting to obd1 and use a p28. good luck.
10-10-2003, 12:37 AM
#4
3.0 BAR
Join Date: Nov 2004
Posts: 5,101
Re:mini-me swap
Originally Posted by ProzacOverdose
use the vtec timing belt. then the dist. that the head came with. then wire the vtec...1 ground and 2 power to ecu. the use a vtec ecu for that year car. but if its an obd2 which i know that motor came from, then i'd suggest converting to obd1 and use a p28. good luck.
Correction you cna use an OBD2 P28. there are very few out there but they do not use a knock sensor. and would be good if you dident want to hassle with the OBD1 converion. Either way you are going to have to use the throttlebody and intake beocuse the y7 intake and TB wont work.
Thread
Thread Starter
Forum
Replies
Last Post
