Mini-Me: block choice
 

I just ran into a guy the other day and he has a z6 IM and Head for 225. the head is rebuilt with, he says, only 3000 miles on it. i am most likeley going to buy it. i have a lil d15b2 with 175k miles on it and i was wondering if it would be worth it to put that head on that block or go with a different one. No i dont have a spare short block lying around. Also i was wondering about those d17's. anyone have any info if they can be used in a mini me and if anyone has used one, or are they a weird engine like the d16a1's

Re:Mini-Me: block choice
 

researcher research. d17/a1 are a no go for bolting on. Compression test your motor. If you get 150's or lower scrap the idea of the head and invest in a better condition bottoem end

Re:Mini-Me: block choice
 

so if i do a comp test and my comp is ove 150 in all 4 cylinders then that would be ok, not saying rebuilding the lil block would hurt. basically what im looking at is buying the head. then if the bottem end in me car right now is good then ill do that but if its borderline ill try to find a block i can rebuild... for cheap.

Re:Mini-Me: block choice
 

Ya but a good d15 motor is 170+ anything below 150 is goin to die really quick with the vtec head and the extra rev range

Re:Mini-Me: block choice
 

i used a y7 block will good outcome. i think a steaight d16z6 would be the best choice her. but a a6 block or y7 block are your best bets. make sure u remove the oil squirter out of the a6 block tho or vtec wont engage

Re:Mini-Me: block choice
 

I say do it.. I've slapped on several z6 heads on stock d15 bottoms, in fact I'm going to do it again to a real high milage d15 and boost it. If the d15 you have in your car runs good right now, just put the head on.

Re:Mini-Me: block choice
 

I agree. I also just put together a Mini-me setup for my hatch using a D15B7 bottom end and the Z6 head. I have yet to install it, but I'm faithfull it will rip harder than the D15B2 DPFI setup thats in there now, ;)

Re:Mini-Me: block choice
 

i remember reading about the guy with the d17 internals in the d16. some machining and matching and he got a good stroker.
http://honda-tech.com/zerothread?id=711756

Re:Mini-Me: block choice
 

that would be moving in the wrong direction IMO but maybe thats just me bc i enjoy the revs of a honda motor

Re:Mini-Me: block choice
 

a good flowin head/cam choice is more of a factor than displacement in many applications. Want to see some video of an all motor h22 makin power to 9500 and peakin on the dyno at 9000 that I tuned. Back on the topic just comprssion test if it comes out fine then do it. End of story