LSD - prolly been covered...MistaBone chime in bro
so just reading around and seeing that lsd is becomming popular and looks to be a decent mod to any car
well what setups are people running? is OBX decent? i see them on ebay with this *Automatic in operation *Eliminates harsh torque steer and understeering characteristics of other types of LSD *Gear operated (No plates to wear or break) *Minimal maintenance requirements *Lifetime warranty from manufacturer defects so what is this minimal maintenance required meaning? is this something a guy in his garage can install?? any write ups ive missed?? thanks guys! |
Re: LSD - prolly been covered...
minimal mantiance means you dont need to take it apart every 10k and replace clutches or tighten ----, etc...means you just throw that bitch in there, and change the oil regularly...
|
Re: LSD - prolly been covered...
obx has to be nice, its on ebay. ;D
|
Re: LSD - prolly been covered...
Yes it is a solid unit.Amazingly they didnt ---- it up for once.
|
Re: LSD - prolly been covered...
i heard something about taking it apart and redoing something before its worth a damn, but i dont know. check w/ mista bones, i am sure he has some kind of experience w/ them.
|
Re: LSD - prolly been covered...
Originally Posted by z1guy
i heard something about taking it apart and redoing something before its worth a damn, but i dont know. check w/ mista bones, i am sure he has some kind of experience w/ them.
|
Re: LSD - prolly been covered...MistaBone chime in bro
1. the hex bolts didn't seem to be evenly torqued out of the box. loosen them and retorque. i forgot what the spec was.
2. the factory bolts that hold the ring gear, hit the side of the lsd. you have to change the bolts or grind very very little off the stock bolts or lsd so they go in straight. |
Re: LSD - prolly been covered...MistaBone chime in bro
do those units actually come with a spec sheet or do you have to find it yourself?
|
Re: LSD - prolly been covered...MistaBone chime in bro
they don't come with anything. :(
|
Re: LSD - prolly been covered...MistaBone chime in bro
weaksauce
|
Re: LSD - prolly been covered...MistaBone chime in bro
Originally Posted by whiterice
1. the hex bolts didn't seem to be evenly torqued out of the box. loosen them and retorque. i forgot what the spec was.
2. the factory bolts that hold the ring gear, hit the side of the lsd. you have to change the bolts or grind very very little off the stock bolts or lsd so they go in straight. I think we torqued them down to 27 or some shiz. Heres what we did so the bolts fit. http://img513.imageshack.us/img513/2...ries0187bq.jpg http://img513.imageshack.us/img513/7...ries0206oz.jpg |
Re: LSD - prolly been covered...MistaBone chime in bro
I don;t even do that, Impact them on, then use vise grips to get the socket off.
even with grinding the bolt shoudlers down, the socket still gets stuck. |
Re: LSD - prolly been covered...MistaBone chime in bro
Originally Posted by Mista Bone
I don;t even do that, Impact them on, then use vise grips to get the socket off.
even with grinding the bolt shoudlers down, the socket still gets stuck. |
Re: LSD - prolly been covered...MistaBone chime in bro
Originally Posted by MADMAX
I think we torqued them down to 27 or some shiz. Heres what we did so the bolts fit. http://img513.imageshack.us/img513/2...ries0187bq.jpg http://img513.imageshack.us/img513/7...ries0206oz.jpg |
Re: LSD - prolly been covered...MistaBone chime in bro
Originally Posted by SmellySOHC
ON every bolt u did that? time consuming but we'll see, thanks again
To have it done right, but it didn't take much time at all. Or you can do what M Bone and HT does and just bend the ---- out of all the bolts and stress the casing. |
Re: LSD - prolly been covered...MistaBone chime in bro
yet to have a tranny comeback..........
|
Re: LSD - prolly been covered...MistaBone chime in bro
the quaife is very close too:
1/2" socket wouldn't even fit http://i7.photobucket.com/albums/y26...e/dscn1040.jpg not even gonna try this ----, i'll round the heads off. http://i7.photobucket.com/albums/y26...e/dscn1043.jpg craftsman 3/8" 14mm worked well http://i7.photobucket.com/albums/y26...e/dscn1039.jpg more bolt shots http://i7.photobucket.com/albums/y26...e/dscn1036.jpg |
Re: LSD - prolly been covered...MistaBone chime in bro
I used a 3\8 drive socket and a impact gun :P
|
Re: LSD - prolly been covered...MistaBone chime in bro
OEM FTW. :)
its frickin awsome. I will probably never have another honda without it. |
Re: LSD - prolly been covered...MistaBone chime in bro
Quaifes are easy, but who else gets to mess with them :)
I've had 5 got thru my hands........nothing like a $2500 tranny! BTW I just found out I have a SCCA national event win last year. |
All times are GMT -5. The time now is 05:17 AM. |
© 2024 MH Sub I, LLC dba Internet Brands