LSD for D16's ??
#15
Re:LSD for D16's ??
Thanks for all the replys...if you could link me (us) to that 14 page write up on the obx lsd that would be great. and if some one knows of a write up on how to swap in an lsd on a d-series that would be awsome..thanks , dave
#16
Re:LSD for D16's ??
Just grab a Haynes/Helms manual, basically just removing the stock differential and installing the new one, theres a few things you have to measure and shim and ---- just like you would when installing a new diff.
I got the LSD off ebay, search OBX LSD and they all pop up for $350
Ill go grab that link
I got the LSD off ebay, search OBX LSD and they all pop up for $350
Ill go grab that link
#17
Re:LSD for D16's ??
OBX LSD Info Thread- Lots of Quaiffe VS OBX but its just because some vendors are being taken out by this low cost LSD
http://honda-tech.com/zerothread?id=918902
Heres the manual online I read as far as installing one goes
http://www.factoryhondamanual.com/
Ive yet to find a thread with pics an info with someone installing one which will make me either install my own or pay the tranny shop the $150 or whatever to do it
http://honda-tech.com/zerothread?id=918902
Heres the manual online I read as far as installing one goes
http://www.factoryhondamanual.com/
Ive yet to find a thread with pics an info with someone installing one which will make me either install my own or pay the tranny shop the $150 or whatever to do it
#18
Re:LSD for D16's ??
how hard is it??
Grab LSD, lay speedo ring gear in place, press on diff bearing with 20 yon press, flip LSD over, press on other bearing.
Open up tranny, remove gearsets, remove diff, swap ring gear, reinstall LSD, measure shim clearances, adjust as needed, reinstall gearsets, button up tranny case.
Now a easy hint.........compare the diffs, the distance between the outer bearing races to get a idea on about what shim you'll need........has to been done with ring gear out of the way.......pic is just to give a general idea........
Easy LSD (Kaaz) install with replacing ISB takes about 3-3.5 hours, the ones that are a PITA to shim (OBX!) tkae 5-5.5 hours.
Grab LSD, lay speedo ring gear in place, press on diff bearing with 20 yon press, flip LSD over, press on other bearing.
Open up tranny, remove gearsets, remove diff, swap ring gear, reinstall LSD, measure shim clearances, adjust as needed, reinstall gearsets, button up tranny case.
Now a easy hint.........compare the diffs, the distance between the outer bearing races to get a idea on about what shim you'll need........has to been done with ring gear out of the way.......pic is just to give a general idea........
Easy LSD (Kaaz) install with replacing ISB takes about 3-3.5 hours, the ones that are a PITA to shim (OBX!) tkae 5-5.5 hours.
#20
Re:LSD for D16's ??
you have to start sometime.........
----, If I can walk BauleyCivic from H-T thru a tranny, anyone can do it.
Just don't hurry and if it don't seem right, take pics and get ahold of me!!!!!!!!
Bauley rushed his, had to take it back apart 3-4 times as he wouldn't listen.
All the little mistakes I made in first 4-5 trannys, he did it all in ONE TRANNY!!!!!!!!
----, If I can walk BauleyCivic from H-T thru a tranny, anyone can do it.
Just don't hurry and if it don't seem right, take pics and get ahold of me!!!!!!!!
Bauley rushed his, had to take it back apart 3-4 times as he wouldn't listen.
All the little mistakes I made in first 4-5 trannys, he did it all in ONE TRANNY!!!!!!!!