HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Hybrid/Tech (https://www.homemadeturbo.com/hybrid-tech-8/)
-   -   LS VTEC in, but shakes... HELP PLEASE (https://www.homemadeturbo.com/hybrid-tech-8/ls-vtec-but-shakes-help-please-12190/)

BigJ 11-23-2003 03:41 PM

Re:LS VTEC in, but shakes... HELP PLEASE
 
No, no oil on the clutch, actually I'm surprised that the clutch works. I had a real hard time taking off the flexplate for the b18 to put my flywheel on. And it's just a stock GSR clutch that I ran with my turbo b16 for 3 months, it still works. The finger wear wasn't even that bad. Goes to show you that launch control does save your clutch.

I got the dealer to blead the clutch for me, I don't have one of those vacuum hoses to get the air out. Also the clutch does grip well, I get sqeeks from 2nd to 3rd at the tires.

I have NO FREAKING CLUE WHAT THIS IS, I bet oneday I'll get in my car and it will just dissappear, or something will blow up. One or the other.

ShadowRex 11-25-2003 09:05 AM

Re:LS VTEC in, but shakes... HELP PLEASE
 
what about possible weak springs. Or Out of balance axels 2 thoughts there for ya.

BigJ 11-25-2003 07:08 PM

Re:LS VTEC in, but shakes... HELP PLEASE
 
The springs are new, but what do you mean by out of balance? How would you palance an axle? You can't put weights on it or anything like that.

I need some more nfo about this.

ShadowRex 11-26-2003 06:54 AM

Re:LS VTEC in, but shakes... HELP PLEASE
 
they are supposed to be checked when they are rebuilt or made new i will look and see what shops balance them. (i have heard of it being done never seen one)

88crxSi 11-26-2003 06:59 AM

Re:LS VTEC in, but shakes... HELP PLEASE
 
or it the axles are even SLIGHTLY bowed it will have a wobble feel..

projekteg 11-26-2003 07:26 AM

Re:LS VTEC in, but shakes... HELP PLEASE
 
yeah, i'm almost positive it's the axles/intermediate shaft :-\

BigJ 11-26-2003 06:22 PM

Re:LS VTEC in, but shakes... HELP PLEASE
 
Well, I think I'm going to have to agree with you guys. Now the next question is, how do I FIX it. Or should I just get some new axles?

I'm thinking about maybe getting some ENJO axles, stage II for the turbo ls vtec. Do they come with an intermediate shaft?

What do guys know about this company, NO-ONE around me does ---- like this with their cars, and I am kinda beyond the help of the local perf shop in expertise now. I live in a ricey area. :'(

88crxSi 11-27-2003 07:32 AM

Re:LS VTEC in, but shakes... HELP PLEASE
 
unless u are dumping the clutch all day long I dont think you will break axles. Jeff (Abaz) uses teg axles i believe.

Doofnoil 11-27-2003 07:25 PM

Re:LS VTEC in, but shakes... HELP PLEASE
 
my shop teacher once told me that if you hear and road noise or feel and shaking/bumps then has to do with the drivetrain/suspenion/or tires... you balanced the tires, check to make sure you didn't blow a shock at some point.

And what does it mean when your car wobbles at low speeds? Mine does this but i've kinda got used to it.

imadouche 11-27-2003 11:32 PM

Re:LS VTEC in, but shakes... HELP PLEASE
 
Next time you drive around Just drink 30 beers before hand. you'll have to try so hard to stay on the road you wont care about the shaking plus it might keep you from passing out good luck


All times are GMT -5. The time now is 08:20 AM.


© 2024 MH Sub I, LLC dba Internet Brands