lower tourqe mounts (EG/B18c1)
okay i have a 92 si hatch and need to know what lower tourqe mounts i will need to use, any b series or would d series work?
|
Re: lower tourqe mounts (EG/B18c1)
you mate the integra bracket to the EG outer bushings.
|
Re: lower tourqe mounts (EG/B18c1)
oh, well i guess that makes sence.
thanks |
Re: lower tourqe mounts (EG/B18c1)
ok jeff ...you should know b is b and d is d.....you of all should know...has to be B series ...
|
Re: lower tourqe mounts (EG/B18c1)
haha shut up bitch. all this time i have owned this car i just realized the other night that i was missing the lower tourqe mounts. ---- moved alot so i might have to get them and slap some window weld on them ;).
where's my money puto :8 |
Re: lower tourqe mounts (EG/B18c1)
Originally Posted by jeffsciv23
haha shut up bitch. all this time i have owned this car i just realized the other night that i was missing the lower tourqe mounts. ---- moved alot so i might have to get them and slap some window weld on them ;).
where's my money puto :8 |
Re: lower tourqe mounts (EG/B18c1)
Originally Posted by FooK
solid polyurethane front bushing replacements and a window welded rear, weeee!
For a really fun ride, weld some plates on the side of the mounts. |
Re: lower tourqe mounts (EG/B18c1)
yeah i need some really stiff mounts because it shakes alot
|
Re: lower tourqe mounts (EG/B18c1)
Originally Posted by jeffsciv23
yeah i need some really stiff mounts because it shakes alot
poly mounts work nice but they make the car vibrate like crazy, most noticeable at idle. |
Re: lower tourqe mounts (EG/B18c1)
Originally Posted by FooK
poly mounts work nice but they make the car vibrate like crazy, most noticeable at idle.
I have energy suspension torque mount inserts and my car shakes like a massage chair at idle :6 The inserts made a big difference in shifting though. Definately worth it. It's not like a rattle box EF is comfortable anyways. |
Re: lower tourqe mounts (EG/B18c1)
Originally Posted by ej1 wilcox
Word.
I have energy suspension torque mount inserts and my car shakes like a massage chair at idle :6 The inserts made a big difference in shifting though. Definately worth it. It's not like a rattle box EF is comfortable anyways. |
Re: lower tourqe mounts (EG/B18c1)
i filled the mounts in my old car with poly and it vibrated alot for the first week or so but then it seemed like everything got used to it and it felt fine, except if you had change in the pocket on the dash it would vibrate. but this isn't my daily driver so i could really care less about shaking.
|
Re: lower tourqe mounts (EG/B18c1)
Originally Posted by FooK
See I had those inserts in my old 95 coupe and they didn't vibrate at all, personally with them I thought the motor mounts still moved too much. I was more referring to a solid poly mount, not just an insert. The inserts weren't stiff enough in my car.
The EF mounts are set up a little differently, which is why I get so much vibration. The ES kit comes with inserts for the front and rear mounts only. Anyways, my motor is solid. It doesn't rock at all. |
Re: lower tourqe mounts (EG/B18c1)
Originally Posted by ej1 wilcox
Really? Which mounts did they insert into?
The EF mounts are set up a little differently, which is why I get so much vibration. The ES kit comes with inserts for the front and rear mounts only. Anyways, my motor is solid. It doesn't rock at all.
Originally Posted by jeffsciv23
i filled the mounts in my old car with poly and it vibrated alot for the first week or so but then it seemed like everything got used to it and it felt fine, except if you had change in the pocket on the dash it would vibrate. but this isn't my daily driver so i could really care less about shaking.
|
Re: lower tourqe mounts (EG/B18c1)
Get casting urathane from McmasterCarr, Works tits, and you can select the durometer/stiffness to suit what you want. Just search casting urethane, BTW 80d is REALLY Stiff, Stock is like 36d.
|
Re: lower tourqe mounts (EG/B18c1)
3 Attachment(s)
Did someone say solid mounts.
Attachment 31595 Attachment 31596 Attachment 31597 I got fucked out of 300 bucks on a set of shitting mounts (1st gen to b motor) So I built these, I don't care if it shakes. Randy |
Re: lower tourqe mounts (EG/B18c1)
Originally Posted by JK_Motorsports
Get casting urathane from McmasterCarr, Works tits, and you can select the durometer/stiffness to suit what you want. Just search casting urethane, BTW 80d is REALLY Stiff, Stock is like 36d.
|
Re: lower tourqe mounts (EG/B18c1)
80d is weaksauce.
i got my some 94a, bitches. i just did my front mount today. im doing the rear tomorow, if i can get to it. http://i64.photobucket.com/albums/h1...edtooth001.jpg http://i64.photobucket.com/albums/h1...edtooth003.jpg http://i64.photobucket.com/albums/h1...edtooth005.jpg http://i64.photobucket.com/albums/h1...edtooth008.jpg |
Re: lower tourqe mounts (EG/B18c1)
Are you going to do them all. Is it Daily Driven, because have you felt 80d? 94 going rape everthing in your car!!! the 80 going into basically my fully caged race car. I did every single mount too.
|
Re: lower tourqe mounts (EG/B18c1)
Originally Posted by JK_Motorsports
Are you going to do them all. Is it Daily Driven, because have you felt 80d? 94 going rape everthing in your car!!! the 80 going into basically my fully caged race car. I did every single mount too.
|
Re: lower tourqe mounts (EG/B18c1)
lol, ---- you bitches. my accord is faster than most turbo d's on here.
anyways, I've felt 94a on another accord, its not that stiff. im only gona do the rear and front. |
Re: lower tourqe mounts (EG/B18c1)
15.21 is fast? since when.
j/k Well if your only doing the front and rear, you might not rattle to much. And an Accord is a little more solid then any hatch I've done this too. But if you did them all, look out. took me 3x longer just to get the motor in as there was no flex to wiggle the bolts through. |
Re: lower tourqe mounts (EG/B18c1)
Originally Posted by d112crzy
lol, ---- you bitches. my accord is faster than most turbo d's on here.
|
Re: lower tourqe mounts (EG/B18c1)
Originally Posted by JK_Motorsports
15.21 is fast? since when.
j/k Well if your only doing the front and rear, you might not rattle to much. And an Accord is a little more solid then any hatch I've done this too. But if you did them all, look out. took me 3x longer just to get the motor in as there was no flex to wiggle the bolts through. |
Re: lower tourqe mounts (EG/B18c1)
so 80d would work good for a civic all all mounts?
Originally Posted by FooK
"That's like being the smartest kid with down syndrome"
|
Re: lower tourqe mounts (EG/B18c1)
Originally Posted by jeffsciv23
so 80d would work good for a civic all all mounts?
|
Re: lower tourqe mounts (EG/B18c1)
80a is still really stiff!
Window weld is only about 65a. And some people say it rattles their cars. The real nice part about using Casting urethane is that it is a liquid then hardens, so you can pour it and Know it gets all the cracks and ----. Using the window glue in a tube is alright, but I've done it and it alway breaks out because of how hard it starts out. |
Re: lower tourqe mounts (EG/B18c1)
well, ive been driving around with my front mount back in for a while now. its not that bad. It shakes the car when its about to die(i have iacv issues right now, so my idle is being gay). but besides that, i cant really feel the stiffness at idle.
Doing the front mount alone makes a difference. I can feel it, just like i feel vtec. |
Re: lower tourqe mounts (EG/B18c1)
Originally Posted by iceracercrx
Did someone say solid mounts.
http://i29.photobucket.com/albums/c2...Mmounts007.jpg http://i29.photobucket.com/albums/c2...Mmounts006.jpg http://i29.photobucket.com/albums/c2...Mmounts009.jpg I got fucked out of 300 bucks on a set of shitting mounts (1st gen to b motor) So I built these, I don't care if it shakes. |
Re: lower tourqe mounts (EG/B18c1)
|
Re: lower tourqe mounts (EG/B18c1)
hey i took a mount out lastnight we should try and fill it with yoru left overs
|
Re: lower tourqe mounts (EG/B18c1)
Sexy. Do you touch your gf with the hand that welded that? :P
|
Re: lower tourqe mounts (EG/B18c1)
She begs for it.
|
Re: lower tourqe mounts (EG/B18c1)
Here's my custom auto to 5spd swap mount. not completely solid and slightly charred but it's been two months and it hasn't got any worse.
if the rubber thats left breaks I have a whole roll of wire in the mig135 :6 I can deal with it if it comes up https://hometown.aol.com/dwmcintosh2/images/mounted.jpg |
Re: lower tourqe mounts (EG/B18c1)
Originally Posted by Dmc1
She begs for it.
|
Re: lower tourqe mounts (EG/B18c1)
Originally Posted by FooK
How is your cousin by the way?
|
Re: lower tourqe mounts (EG/B18c1)
Originally Posted by jeffsciv23
hey i took a mount out lastnight we should try and fill it with yoru left overs
|
Re: lower tourqe mounts (EG/B18c1)
okay filled one of the top mounts with the 90d lastnight, before i came to work i felt it and that ---- is stiff as ----, gonna put it on and do the other side tonight probly.
|
Re: lower tourqe mounts (EG/B18c1)
ok got the top two mounts filled and it is solid as ----. don't think i'll even have to fill the rear one.
|
Re: lower tourqe mounts (EG/B18c1)
isnt stiff how you like it? :-* :-X :P
|
All times are GMT -5. The time now is 06:26 AM. |
© 2024 MH Sub I, LLC dba Internet Brands