JDM ZC, D16A6 , D16 sohc vtec???
 

jdm ZC, D16A6, or D16 sohc vtec??? which one of this would be better rebuilt for turbo?

Re:JDM ZC, D16A6 , D16 sohc vtec???
 

All 3 have the exact same bottom end.. So bottom end wise, their is no advantage in any of them...

3 differnt heads... The ZC flows the best, but does not have aftermarket support like the Z6 does.. I personally like DOHC's alot better. The ports and all the valves are larger on the ZC as well. To some the ZC is the Best to build up since it's a twin cam design, but The Z6 has more aftermarket valve train support. which is very nice.. Either way, you could make any 3 of those motors pull 10 sec slips if you really wanted too.

This is my preference...

ZC DOHC
D16y8 or Z6
D16a6

Jeff

Re:JDM ZC, D16A6 , D16 sohc vtec???
 

doesn't the z6 have squirters that shoot oil on the bottom of the pistons? i read somewhere all vtec blocks had them.

Re:JDM ZC, D16A6 , D16 sohc vtec???
 

Nope, all B-series Vtec blocks have Oil squirters.. \
B16a/b B17a B18c

Jeff

Re:JDM ZC, D16A6 , D16 sohc vtec???
 

D16Y8 has no oil squirters?

Re:JDM ZC, D16A6 , D16 sohc vtec???
 

As far as I know, I havent seen a D-series with them period, I will double check..

Re:JDM ZC, D16A6 , D16 sohc vtec???
 

d16y8 = no squirters

Re:JDM ZC, D16A6 , D16 sohc vtec???
 

do, let me get this right...you can put a ZC head on a, let's say, d15b7 bottom end with no MAJOR modifications?

Re:JDM ZC, D16A6 , D16 sohc vtec???
 

no you cant...

Re:JDM ZC, D16A6 , D16 sohc vtec???
 

phew! that's what i thought! for a second there...i got a little excited!

Re: JDM ZC, D16A6 , D16 sohc vtec???
 

is vtec really better than non vetec???

Re: JDM ZC, D16A6 , D16 sohc vtec???
 

You can just slap a vtec valve cover on a non vtec head and be all good. I'd take a nonvtec d-series anyday over a y8 or Z6. Only vtec head I'd use would be a y5. Wait I did use use a y5. VTEC-E FTW!

Re: JDM ZC, D16A6 , D16 sohc vtec???
 

Hey, the noob searched. Hooray!

Re: JDM ZC, D16A6 , D16 sohc vtec???
 

the whole head?? or juss the valve cover??

Re: JDM ZC, D16A6 , D16 sohc vtec???
 

you cant put a vtec valve cover on a non vtec head, spark plugs are in front on the vtec and in back on the non

Re: JDM ZC, D16A6 , D16 sohc vtec???
 

but you can put a vtec head on a non vtec block, its called "Mini Me". Search ze internets for it, its been done for years.

Re: JDM ZC, D16A6 , D16 sohc vtec???
 

Hello...earth to ------- noob....it's called a y7 you ------- ----. Jesus ------- Christ know what your talking about before you shoot your dirty AIDs infected cockhole off. ::)