Here is my problem, I swapped from y7 auto to d15 vtec JDM MANUAL in an EK Hatch Back. I used a y8 (auto) engine harness so I would not have to wire vtec. The car cranks but does not start. I checked all fuses, and fuel pump and all fuese r good and the fuel pump delivers fuel when u connect it manually, but it wont deliver fuel when connected normally. I know a ton of people who have done this swap on here (dont know if its exactly like mine) and can help> I would appreciate all the help i canget.

Now is anything imentioned above that does not work together? thanks for your help in advance guys.

 

switch back to your original harness you boob
you gotta add vtec wires anyways, your just adding more problems into the mix
quit being a lazy ----, and your iacv wires need switching also

 

what ecu are you running

 

Just to get it started i am running a P2P. but i am going to get a chipped ECU and jumper harness in the next day or two, pending xenecron has any in stock.