HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Hybrid/Tech (https://www.homemadeturbo.com/hybrid-tech-8/)
-   -   JDM D15 VTEC?? (https://www.homemadeturbo.com/hybrid-tech-8/jdm-d15-vtec-15308/)

VtecvsVr6 02-03-2004 05:18 PM

JDM D15 VTEC??
 
Hey Guys im new to your forum i was reccomened here from HHU. I have a 93 civic hatchback and when i think about it i miht just build a SOHC VTEC motor for boost. i wana hit 12's and i here its possible. I was wondering is the JDM D15 Vtec motor the same is the D16z6? Or can i interchange the parts??? Let me no cause im soon to purchase a new motor for my civic. it already has a mini me on it but its not running cause i need timing belt tensioner on it and its leaking anti freeze from somwhere. plus i wana build the motor before i put it in so i wana no D15 or D16 Vtec motors?? Thanks ???

Dr.Boost 02-03-2004 05:41 PM

Re:JDM D15 VTEC??
 
You want to run 12's? Are you prepared for that?

You can change and swap almost anything from those two motors(and most all SOHC for that matter). If you plan on running some serious hp, I would stick with the 1.6(D16Z6, D16Y8, D16A6<<<non-VTEC block).
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

VtecvsVr6 02-03-2004 06:04 PM

Re:JDM D15 VTEC??
 
Well do you no where i can pick up a d16z6 or Y8 (i want vtec) cheap cause i don't no where to find one at hmotorsonline doesn't have it so???

Dr.Boost 02-03-2004 06:19 PM

Re:JDM D15 VTEC??
 
Junkyard, Egay, Forums,....all over the place. Do you need the whole motor, tranny, ecu or just a block or block and head or what?
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

VtecvsVr6 02-03-2004 06:31 PM

Re:JDM D15 VTEC??
 
Well ima going to need complete i guess cause ill end up buying the tranny for better ratio and ecu so i can wire the vtec unless i get a VAFC.

hotrex 02-04-2004 12:58 PM

Re:JDM D15 VTEC??
 
i have a fully buily d16y7/y8 mini me. ill be lookin to hit 12s on about 18psi this spring....i say go fo rit... i have about 2000 tied up into the motor, about the same as youd spend on a b series swap....and my setup will piss on a b series swap

djfob 02-04-2004 01:47 PM

Re:JDM D15 VTEC??
 
Don't mean to jack the thread but does the JDM d15 also use a p28 like the d16z6.

mahcivic 02-04-2004 07:05 PM

Re:JDM D15 VTEC??
 
hey man, my frienust got one of those motors for his civic, cost him 800 bux for everything for the swap. good deal, he has 7k miles on it so far, running 10 psi daily with an afc and 450s, and NO problems. things fast to, he his clutch wasnt slipping itd be even faster! :) just thought id let you know

Dr.Boost 02-04-2004 07:19 PM

Re:JDM D15 VTEC??
 

Originally Posted by djfob
Don't mean to jack the thread but does the JDM d15 also use a p28 like the d16z6.

I believe it uses a P08.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

Sinner 02-04-2004 07:29 PM

Re:JDM D15 VTEC??
 
Here is the deal with the jdm d15b

its the "perfect mini-me". It has a very similar bottom to the VX expect it has stronger rods and a z6 pistons. It can run on a p28 all day long. I've had mine turbo since I installed the motor, never a problem. its JDM y0.

Get a z6/y8/a6 They have the strongest rods.


All times are GMT -5. The time now is 07:21 PM.


© 2024 MH Sub I, LLC dba Internet Brands