Issues i need to resolve with my Teg

Reply Subscribe

Thread Tools

Search this Thread

02-17-2006, 09:26 AM

#21

levan634

0.5 BAR

Thread Starter

Join Date: Feb 2006

Posts: 65

Re: Issues i need to resolve with my Teg

i think im gonna replace my o2.....and for the tps i would like to replace it...but on my throttle body you cant just take the tps off....you need to get a whole new throttle body...its gay...does anyone know how to get round this

02-17-2006, 02:01 PM

#22

Donald125

3.0 BAR

Join Date: May 2003

Posts: 6,279

Re: Issues i need to resolve with my Teg

Quote:

Originally Posted by levan634

drill the rivet out and use regular bolts to put it back. adjust the TPS voltage first.

02-17-2006, 04:28 PM

#23

levan634

0.5 BAR

Thread Starter

Join Date: Feb 2006

Posts: 65

Re: Issues i need to resolve with my Teg

awesome thanks....by drilling the rivet do i just use a bit that fits and drill till it comes loose?

wow lots of feedback from this site....its great...Fukc honda-tech bunch of cocky ricer biatches

Thanks everyone

02-17-2006, 06:13 PM

#24

mahatma

0.0 BAR

Join Date: Jan 2006

Posts: 25

Re: Issues i need to resolve with my Teg

Quote:

Originally Posted by JDMFantasy2K

check the o2 sensors, i know it would probably throw a code, but when i had a bad one it would get jerky.

Me too

02-18-2006, 12:45 AM

#25

JDMFantasy2K

3.0 BAR

Join Date: Aug 2005

Posts: 1,654

Re: Issues i need to resolve with my Teg

Quote:

Originally Posted by RotaryGeek

yeah my o2 sensor went out, and it was really bad for about two hours before it finally went all the way out. it didn't throw a code till it was dead. it ran like ---- and would bog until i ran WOT. at WOT it ran really good though. it idled a little funny and would die on the road unless it was full throttle. so def check that, just buy a new one.

yeah it sucks when mine was boosted too because since i was running a conservative tune and the car couldn't figure out the a/f ratio, it was dumping ---- loads of fuel in, and caused misfired on all 4 cylinders

once it's in open loop mode though, it was good.