HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Hybrid/Tech (https://www.homemadeturbo.com/hybrid-tech-8/)
-   -   ISB is out! Now wtf do I DO??? BONE HELP! (https://www.homemadeturbo.com/hybrid-tech-8/isb-out-now-wtf-do-i-do-bone-help-94732/)

JoshMO 08-24-2008 05:37 PM

ISB is out! Now wtf do I DO??? BONE HELP!
 
So I finally located a B-000 tranny, I got it off this kid for $80. The only thing wrong with it is I noticed there was some back and forth play in the input shaft. So I tore it apart and noticed it was missing about 4-5 ball bearings around the input shaft on the inner part of the bell housing. I've looked everywhere for a replacement bearing for this. But no one has it that I'm aware of. O'reilly's checked the NTN part# ( NTN SCO5A61) with no luck. I'm at a dead end. This is the first time I've ever been inside a tranny and my manual doesn't cover anything on the inside of the tranny. Someone help me out with this, as I need to be putting this tranny on this week or I'll be walking. Bone I know you know this stuff, chime in man. PLEASE

Thanks


Another question would be.

Am I suppose to just repack this race with new bearings? Or is there a complete bearing pack that goes around the input shaft. I noticed when I pulled the gear set off that there was just the race and the bearing surround the input shaft. No inner "small metal circle" like a typical bearing would have. I am very confused about what to do from here.

JoshMO 08-24-2008 06:49 PM

Re: ISB is out! Now wtf do I DO??? BONE HELP!
 
Well I searched and found the part numbers on this site. I'll hit up a dealership tomorrow. Hopefully I'll get lucky.

txdohczc 08-24-2008 09:48 PM

Re: ISB is out! Now wtf do I DO??? BONE HELP!
 
some where there is a write up on how to change the isb. it gets in to all the details it may be on d-series or ht(gayest site ever)

txdohczc 08-24-2008 11:29 PM

Re: ISB is out! Now wtf do I DO??? BONE HELP!
 
i dont know if you already looked it up or not but here is the write up i was talking about http://www.d-series.org/forums/showt...hlight=bearing

HMTguy 08-25-2008 12:35 AM

Re: ISB is out! Now wtf do I DO??? BONE HELP!
 
jb weld it isbs are for tangs

Bone1 08-25-2008 04:41 AM

Re: ISB is out! Now wtf do I DO??? BONE HELP!
 
Got B000 ISB bearing and 4 seals sitting here.

MAJORAHOLE 08-25-2008 10:36 AM

Re: ISB is out! Now wtf do I DO??? BONE HELP!
 
i did it in my tranny, i forget where the write up was though. it was a little intimidating.
i'm sure bone knows where that write up is

HMTguy 08-25-2008 11:45 AM

Re: ISB is out! Now wtf do I DO??? BONE HELP!
 
It's easy, common sense owns this kid. He always makes a thread when he has any stupid little question then he realizes how dumb he is :1

JoshMO 08-25-2008 12:24 PM

Re: ISB is out! Now wtf do I DO??? BONE HELP!
 
Bone, if I can't find one local how much you want for one and a seal? PM me and let me know.

JoshMO 08-25-2008 10:22 PM

Re: ISB is out! Now wtf do I DO??? BONE HELP!
 
Well I was unable to find one local. Bone hit me up. You've got PM man.


All times are GMT -5. The time now is 12:29 PM.


© 2024 MH Sub I, LLC dba Internet Brands