Intake Manifolds??
2 Attachment(s)
Does anyone know what manifolds will fit the d15a3 besides the stock one with the thumb sized throttle body? Im already thinking custom build >:(
|
Re: Intake Manifolds??
From a previous post on HMT that i read --- a d16 mani may fit....
|
Re: Intake Manifolds??
any d series manifold will fit. go with a z6 or y8 and you will be happy
|
Re: Intake Manifolds??
I can vouch for the z6, thats what i'm running w/ my setup now..... :y
|
Re: Intake Manifolds??
I have a p08 intake mani(z6) bare for 50 bux plus shipping
you may want to raise you rev limit a tad also |
Re: Intake Manifolds??
y8 ftw!!! big fatt plenum and shorty runners d-seires type aarrr right there
|
Re: Intake Manifolds??
i would have to see a picture of it. I also need the entire intake, fuel rail im guessing, and the throttlebody. I know mine wont fit. besides the blade in mine is the size of a quarter. FOR THE RECORD. Im not saying you ARE wrong but i have tried to match up several single cam intakes from more modern hondas and they dont match this one. 1st gen crx si motor. heres a pic of an old one of mine all apart
this throttlebody makes me want to puke!!!!! http://i17.tinypic.com/6aqqyox.jpg http://i15.tinypic.com/4uxd26x.jpg http://i14.tinypic.com/4v82xad.jpg |
Re: Intake Manifolds??
woboy those ports are uber small
ur only chance is to change the entire head |
Re: Intake Manifolds??
THATS IT!!!! Im getting the TIG out tomorrow. That dinky ass TB is goin in the garbage. :y
|
Re: Intake Manifolds??
TIG??
dont TIG ----, ur head ports are the size of pennies better bust out the carbide bit instead I forsee 4hours a port to get to a standard sized d16 size better buy a new head instead ;) |
Re: Intake Manifolds??
adapter plate
add 86-87 throttle body d16a1 port match manifold |
Re: Intake Manifolds??
why the 86 87? is there something particular about it?Heres the deal. I get parts off a friend of mine that rapes and destroys hondas daily. Hes got tons of ---- but I dont know what any of it came from. The whole barn is full of about ten hondas and acuras in pieces. LITERALLY. I cant tell by looking at it, what it goes to. I was just going to snatch a TB and roll with it.
|
Re: Intake Manifolds??
tps for pre 0bdo is very different then the motor obdo+tps
|
Re: Intake Manifolds??
I dont care about any of that. It will still hook to my ms wont it? My TPS took a dump anyways. I was going to change it. To my suprise its riveted to the TB so I have to change the whole thing. Im not putting that sad excuse for a TB back on my car. I had a honda trail 50 with a bigger carb on it! If anything what would be a good DIA. to look for and not be over doing it???
|
Re: Intake Manifolds??
damn,m i didnt realize it was that old school. wont fit for sure
|
Re: Intake Manifolds??
Ya man that junk is bad....that needs to be reeeeemoved fast...
|
All times are GMT -5. The time now is 03:10 PM. |
© 2024 MH Sub I, LLC dba Internet Brands