installing autometer tach??
i have it all hookd up but i need to know what wire to connect the signal wire to to the tach? i have the factory tach in my 90 civic si but not sure which wire on the back of the plug i need to cut. can someone please help asap Brian
|
Re:installing autometer tach??
i used one of the wires going into the top the dizzy, i believe it was the green one. if you take the cover off it should go to the negitave screw on the coil.
|
Re:installing autometer tach??
No need for that, there is a signal wire that mostly goes unused unless you have cruise control. If you have a Haynes manual you should be able to figure it out, just look at the wiring diagram. I hooked the signal wire on my Autometer tach to this wire, and it was located by my clutch fluid resivoir (sp?)
|
Re:installing autometer tach??
....How about returning it and using your original tach ???
Seeing these oversize cookie jars in everyones window is making me sick :P. Sorry, just a pet peeve, cant stand them things, like having obnoxious wings. Just makes me scratch my head and wonder what money I could have spent making my car go faster. (like a Z6 head, Ive seen a few of those around for 150$) Guess you get a bit sour when you get older. Back in the day I thought these were cool too. Build how you want. Keep the shift light and mount it inside the dash. That you actually use. (unless you have an Ignition Pill) |
Re:installing autometer tach??
that was funny...lOl ;D
|
Re:installing autometer tach??
shift light is ok. But the monster tachs are bleee...
|
Re:installing autometer tach??
blue wire off the dizz don't worry about them talking ----, do what you want man, it's your car. If YOU want to go ahead and put a 12" tach in your ride, don't listen to them.
|
Re:installing autometer tach??
someone had a koala bear chewing on his bamboo ;)
|
Re:installing autometer tach??
I really don't see why you need another tach unless you're revving past eight, but then again I don't believe in much cosmetically in my car. there's a blue wire on the electrical plug that goes to your gauge cluster, use the t that came with the tach and attach the green wire from the tach to that blue wire. I'm going to do a write up on complete install when I get my camera back from storage since this question comes up periodically.
I think I'll put a big assed clock on my dash so I can always know what time it is, I'll color match it to my v-tech sticker. |
Re:installing autometer tach??
I think I'll put a big assed clock on my dash so I can always know what time it is, I'll color match it to my v-tech sticker. |
All times are GMT -5. The time now is 04:26 PM. |
© 2024 MH Sub I, LLC dba Internet Brands