install injectors or not install?
 

i just wondering if i install injectors that i bought from blaast .. they are 450cc bosh low impendance, ive too resistor box.. but i bought them for my project turbo but i need a lot stuff still for to finish it.. so i was wondering if i install them, what do you think? right now, im runing stock :l (im looking for a set of GSR cams..)

install them? or just install when i get all stuff for my project turbo?.

Re: install injectors or not install?
 

As long as you burn a new bin to accomodate for them, might as well install them now. By installing things one item at a time, you can troubleshoot problems much easier down the road.

Re: install injectors or not install?
 

mm then i will install them in this days.. im runing w/ crome.. so i only need to change injector flow rating to 450cc , burn it and run!, right?

Re: install injectors or not install?
 

Yes that should do it.

Re: install injectors or not install?
 

cool, thank you brother, i was thinking it cuz i need to know if injectors works fine besides resistor box.. i bought them frmo blaast so i think they will work good..

;)

Re: install injectors or not install?
 

BTW, i will need to install fuel tools after to put new injectors flow rating? i say that cuz when i try to put new injectors, i put new injectors, click ok.. and crome just keep stock injectos though map change fuel values but if i install fuel tools and put new injectots..crome keep the new injectors flow rating ... :S , yes im still noob about tuning :-[ though the book about how to tune and modify an engine management system is helping me alot.. :)

Re: install injectors or not install?
 

what isi a fuel tool

Re: install injectors or not install?
 

OK walt here's what you need to do...

open up the map you've been running.

click tools,
then fuel multiplier ( i believe that's what you mean by fuel tool)
obviously enter the old, and new flow ratings, and make sure everything else is okay.
That should be enough to get it to run.


edit: i see where you found fuel tools. You don't want that. I don't know what it does so leave it alone :P

Re: install injectors or not install?
 

yep i means wheter install plugin fuel tools or no but i see..

thx.

Re: install injectors or not install?
 

If I understand it correct, I would say you do want to use fuel tools aka fvft (final value fuel tools). The original fuel multipliers run through the map and scale the value by the multiplier, The multiplier then goes back to 1.00 as the scaling is now done. The fuel tools plugin moves the value to a permanent multiplier, and leaves the maps alone. It lets the ecu do all it's calculation, then multiplies the final value by the scaler. It allows you to change the multiplier, add an offset, etc. without changing the integrity of the maps. This should equal less fine tuning.

I'm just a noob readig about this myself, if I'm mistaken, I'm sure JD will come slander me properly.

Re: install injectors or not install?
 

well today i TRIED to install them but i had problems.. the stock plugs cant hook up with dsm injectors.. and the bottom seals neither..

and i broken a "seal" (i really dunno who it's called)..

i broken this..

this is an injector that i bought from blaast..

http://img9.picsplace.to/img9/20/seal.jpg (look the black arrow.. this hasnt ..the seal?)

now look an injector that i found in the net..

http://img7.picsplace.to/img7/25/seal_1.jpg this HAS that seal or that thing that i dunno how it's called..

how it's called that thing what im refering?

i need a set for the dsm injectors and one for my stock injector that i broke... other thing.. how can i to remove the remainders of that seal or ---- that i broke? i tried to remove all with a screendriver but i didnt can to remove...

hope you understand. :-\

Re: install injectors or not install?
 

BTW, i installed again stock injcetors with one without the seal that i broke thought and i started the car and idle be normal and it seems to be without problems so i m worried if i can to damage that injector without that seal...

Re: install injectors or not install?
 

btw, its not called seals. i believe its called caps if im not mistaken. you dont need the cap. it will work fine without it. just make sure you dont drop it. they protect the pintle, be gentle when your installing them and dont drop them. It shouldnt be leaking from where the cap is at.

Re: install injectors or not install?
 

really? ok , when i installed back again the stock injectors, one has that "cap" broken and running fin my car.. but could damage injector runing without that "cap" ?

thx.. and i will have to found the dsm plugs.. :-\ in somewhere..

Re: install injectors or not install?
 

ok, solved..

thank you blaast ;D

Re: install injectors or not install?
 

damaged injector pintle would not run properly in the engine. if the pintle is not damaged without the cap it would be fine. Like i said before its just to protect it from damaging the pintle.

https://www.homemadeturbo.com/tech_p...dsm_clip_P.jpg
No need for additional dsm plugs harness.
Tough to see in this picture, but on the 2g DSM injector connector, it has a little keyway slot that interfers with the factory honda plug. This is a real simple fix, just get a razor blade and cut the little tab right out so the plug snaps on nice and tight.

Re: install injectors or not install?
 

cool!! thank you! ;) i will fix that this week!

Re: install injectors or not install?
 

Yo walter

https://www.homemadeturbo.com/tech_p...dsm_injectors/

Re: install injectors or not install?
 

;)