ignition output signal?
 

so my beater dies on me today. its throwing code 15. which is ignition output signal. what the ---- is it? is that the ignitor? The problem was when i was driving the car and it just died. theres fuel no spark. i thought im thinking its the ignitor. but whats the ignition output signal? something in the ignition switch? anyway to override it?

Re: ignition output signal?
 

You need to check to see if there is power at the two pin connector at the distributor with the ign on if not then it is a short or something in the wire coming from the ign switch fuse box.If there is you may have bum igniter.

Re: ignition output signal?
 

does anyone know if the obd 0 and obd 1 ignitors are the same?

Re: ignition output signal?
 

they are not. ive replaced three coils in my LS now, and the obd0 one i had laying around wouldnt even fit in the dizzy

Re: ignition output signal?
 

3 coils? think there may be something wrong. they are def different. well the part numbers are different. im just going to sell the car as is for cheap

Re: ignition output signal?
 

What is the car?

Re: ignition output signal?
 

All electronic distributor Honduh/Acura ignitors are the same. Fookle is thinking of coils.

The IGO is the signal the ECU sends to the ignitor to tell it to fire. Lack of power on the 2P connector will make it seem like the ignitor is not there to the ECU, or a bad connection on the IGO wire itself, or a bad ignitor.

Re: ignition output signal?
 

changed the nigniter today and that wasnt it. well maybe the ignitor was bad, was going to sell the car to skinnye but the stupid car wouldnt start, im afraid to try the one from my coupe due the fact that it might mess mine up. reason i ask if there the same is because the part numbers are different. obd0 civic si is 06302-pt2-000 my 93 civic ex 06302-pt3-000. It is ------- freezing outside and snowing, kind of a pain to work on it currently. What a piece!!! :7