I want to do 10,000 rpms on my d16z6
 

I have a d16z6 and I would like to know what all I need to get to make this thing do 10,000rpm's more than once.

10g tach
tighter valvesprings
better reatainers
cam?
what else?

Re:I want to do 10,000 rpms on my d16z6
 

real thin oil should do the trick

Re:I want to do 10,000 rpms on my d16z6
 

what about a new ecu and/or a vafc?
is there a simple fix to remove the fuel cutout?

Re:I want to do 10,000 rpms on my d16z6
 

you cannot do it on stock rods... and you will have to have a chipped ecu and a serious cam.

Re:I want to do 10,000 rpms on my d16z6
 

I was checking out the stage III setup from skunk2. I think that they have everything except the rods and pistons.
would I use stock compression?
Is this type of setup worth while?

Re:I want to do 10,000 rpms on my d16z6
 

Why do you want to spin it so fast? N/A sucks. :P
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

Re:I want to do 10,000 rpms on my d16z6
 

I just wanted a cheap under 600 mod so I could sell my car on ebay, but it seems cheaper to boost it again.
should I sell it stock or turboed?
1994 del sol si 108000miles

Re:I want to do 10,000 rpms on my d16z6
 

sell it stock youll get more for it.

Re:I want to do 10,000 rpms on my d16z6
 

600 bucks and spin to 10,000 rpm's LOL. If your serious your lookin at more like 6000. All Motor isnt cheap

Re:I want to do 10,000 rpms on my d16z6
 

yeah, I had to do the research, and I guess it was just wishful thinking. :(
Since stock will bring more money, then I will leave it stock. Thnaks for all of the help-yes I spelled thnaks on purpose, it's a Kentucky thing.

Re:I want to do 10,000 rpms on my d16z6
 

stage 3 cam. 600
rods. 400
valvetrain. 600
machine work. 200

right there you are at $1800- and you havent touched any electronics.

why?

Re:I want to do 10,000 rpms on my d16z6
 

no joke, plus it doesn't go pssshht when you shift. I guess it was a very shitty idea. hell,for 1800 I could do a great hmt setup.

Re:I want to do 10,000 rpms on my d16z6
 

you could do 2 homemade turbo set-ups.


all motor is cool for autocross, and such....but not for the street car or strip car. Even in autocross they dont rev to 10K. Serious autocrossers do, such as the world challenge cars....but nothing worth the street....

Re:I want to do 10,000 rpms on my d16z6
 

but you get the cool braggin rights and you sound like badass when you rev your engine to 10k! Just get a sport bike and you can hit 10k all day.

Re:I want to do 10,000 rpms on my d16z6
 

shift from fifth to first= 10,000rpm + ;)

Re:I want to do 10,000 rpms on my d16z6
 

it could be done. i met a guy runing a crower stage 2 n/a cam with stock spring retainers and chipped ecu, stock y8 bottom end hitting thirteens on 22inch slicks at lacr at 10k. hes was also runing a zc/si hybrid trans. i dunno how long that motor lasted but he put on his street tires and drove home, cant be that bad.

Re:I want to do 10,000 rpms on my d16z6
 

lol....That motor would be dead after a few hundred miles...depends on how often you rev to 10K
And the cilinder would get really beat with that R/S ratio....

Re:I want to do 10,000 rpms on my d16z6
 

with just a cam and ecu mods.....I hope he made it home.

Re:I want to do 10,000 rpms on my d16z6
 

what kinda cam can make power at 10K rpm????
AFAIK not even comp cam/JG/crane/webcam nor crower makes one :P

Re:I want to do 10,000 rpms on my d16z6
 

JG makes one for 10K but it need aftermarket everything.
complete HP bottom end and complete valve train, not to mention a fuel system to handle that, and a ecu to.
(I have a video of this if you want it)--but its a B series.

Re:I want to do 10,000 rpms on my d16z6
 

yes please send it to me, id like to see it aim:white90zc