The engine on this pic are closer to the firewall than normal. But anyone have an idea of how they do to install the rear mount? because the engine and obviously the tranny are really close to the firewall, so there is not enough space to install the tranny rear bracket.

 

Bolt the mount to the chassis and lower the engine in, hit up the two bolts holding it to the trans from the bottom.

 

With the engine in that position there is now way to get the rear bracket in there. It needs to be moved forward, with the other mounts removed, then you can squeeze the rear bracket in, bolt it onto the frame mount as mentioned, and bolt it to the motor once you get the other side mounts on. (Easiest way from my experience with b18s in EFs.)

 

---- that, I'll stick with my d16