HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Hybrid/Tech (https://www.homemadeturbo.com/hybrid-tech-8/)
-   -   hf and dx/si ASAP!! (https://www.homemadeturbo.com/hybrid-tech-8/hf-dx-si-asap-10084/)

90civicdxtobezx 09-25-2003 05:00 PM

hf and dx/si ASAP!!
 
i puled into my local ameristop and as soon as i parked my batt light came on instantly. i checked the conections and restarted nothing.

i have a spare crx for parts will the 90 hf alternator fit in my 90 dx with a zc. they look different. ive posted about this damn thng before(alt). do youthink it just finaly died? will the hf fit in my dx the plug is the same.

help geting dark in about 3 hours

90civicdxtobezx 09-25-2003 06:50 PM

Re:hf and dx/si ASAP!!
 
ok i left the green plug off and now i have a chk engine light with no codes

whats wrong with my car????? ??? ??? ???

SpeedyJAY 09-25-2003 07:00 PM

Re:hf and dx/si ASAP!!
 
Yes The alt will fit, I have an HF alt on my ZC engine right this minute.

90civicdxtobezx 09-25-2003 08:49 PM

Re:hf and dx/si ASAP!!
 
thank you ;D

Honda16hb 09-25-2003 09:01 PM

Re:hf and dx/si ASAP!!
 
most alternators are interchangable, my brother has my old dx alternator on his b16, we just had to use the 3 rib belt instead of the 4 rib.

yesd0g 09-26-2003 10:14 PM

Re:hf and dx/si ASAP!!
 
If your batt light came on more than likely its the alt brushes, you can put new alt brushes in for about 12 bucks, and you alternator is good as new. if this is a route you want to take, post a reply, and ill talk you through it

90civicdxtobezx 09-27-2003 07:13 PM

Re:hf and dx/si ASAP!!
 
after about 2 hours of fighting with the alternator i got it out of my hf. im going to test it and run with it. if its a turd ill re post and get the info

thakns

Honda16hb 09-28-2003 12:48 AM

Re:hf and dx/si ASAP!!
 
it's easier if you unbolt the brake master cylinder from the booster and pull that out of the way.

yesd0g 09-28-2003 12:21 PM

Re:hf and dx/si ASAP!!
 
Ya its pretty tight. If youve got the alt out, you should replace the brushes anyway, it would suck for you to run that alt. that tests good, and have it quit three weeks down the road, and have to do it all over. It only takes a soldergun, a couple of other tools, and about half an hour.

90civicdxtobezx 09-30-2003 07:50 AM

Re:hf and dx/si ASAP!!
 
the hf came out like a bitch. but the dx one fell right out i didnt have to fight it. there are noticable differences in size between the hf and the dx. dx way bigger. is the amperage the same? i think i wanna go ahead and rebuild my alt. so if anyone could help that would be great.


All times are GMT -5. The time now is 10:26 PM.


© 2024 MH Sub I, LLC dba Internet Brands