ok i have a 93 civic ex, turbo, im putting dsm 450 injrctors, and have two wire harness... somehow i have an obd0 full wire harness here. I have a cut obd1 that just needs the injector wires. i need to know should i find a way, if there is one, to cut where obd1 connects and use the full obd0 harness with the clips to the firewall spliced with obd1 connectors. or should i cut the injector wires off the obd0 and just splice those to my obd1 harness. i am going to be using resistors as well. running short on budget so cant buy a new harness... also need a distributor, cheap... asap... turbo kit complete!!!

 

solice the harness and make sure you solder the joints and shrink wrap them as well.

 

wire the obd0 clips to ur obd1 harness