help!?..jdm b16a1 first gen into a EGhatch
 

just wondering whats all needed to do the swap..i got the complete swap...put it in my 90 integra..but i'm about to buy a 93 civic cx..and i wanna put that motor in there..
i know i need a hydraulic trans...and an 0bd1 ecu..could i just use a b16a2 wiring harness?..or am i able to use the 1st gen b16a1 wiring harness?..help me out..possible ls/v-tec motor also..but how would i wire a 1st gen b16 head to a 92-95 civic eg...hopefuly ya'll can help me out..thanks
tyang

Re:help!?..jdm b16a1 first gen into a EGhatch
 

Uhm, you normally never use the harnesses that come with jdm engines. You modify the stock wiring hareness to fit.

If you want to use a JDM B16a1 (OBD0) in your OBD1 93 civic, you will need to get Saturated injectors (or use your old ones) get a external map sensor. Get a OBD1 B-series Distributor, and Hydro trans, along with a OBD1 B16a ECU.

Jeff

Re:help!?..jdm b16a1 first gen into a EGhatch
 

hasport sells a kit so you can use the cable tranny... ::)

Re:help!?..jdm b16a1 first gen into a EGhatch
 

thanks for the help..what do you mean saturated injectors..or old ones..which olds ones?...so..which wiring harness do i actualy use?..just the stock civic wiring harness...this is the engine wiring harness rite?.
sorry so many questions..but thanks again
tyang

Re:help!?..jdm b16a1 first gen into a EGhatch
 

The old injectors... meaning your stock injectors you have in your car right now will go into the B16a. Dont worry they flow the same (240cc) 1g B16a injectors are hold&peak style injectors, and will not work with an OBD1 system unless you get a resistor box. Your better off just using your old ones.

As in ENGINE harness, yes use your old one to fit, most the sensors will work just fine, you will need to use the o2 sensor (4wire) from your D series engine on your b16a, and you will need a new coolant temp sensor plug, (the obd1 plug is on the t-stat housing, and the obd0 is on the back of the block, 2 pin) real easy..

Jeff

Re:help!?..jdm b16a1 first gen into a EGhatch
 

and by your old car.. he means your 93 civic not the teg.. I think thats where he was gettin confused.

Re:help!?..jdm b16a1 first gen into a EGhatch
 

thanks for the help jeff.

Re:help!?..jdm b16a1 first gen into a EGhatch
 

i have a 92 eg cx and id like to get a b16 as well either jdm or not but can you give me any facts or commrntsabout the swap