HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)

- Hybrid/Tech (https://www.homemadeturbo.com/hybrid-tech-8/)

- - HEAD GASKET (https://www.homemadeturbo.com/hybrid-tech-8/head-gasket-75096/)

SkunT

03-12-2007 07:23 PM

HEAD GASKET

----.

I dont know if my bore is 81mm or 81.5. I need to buy a HG, which way do you think I should go? There is a OEM head gasket on there now, so can you get a OEM HG in 81.5mm?

TorganFM

03-12-2007 07:25 PM

Re: HEAD GASKET

Just use the 81mm gasket. I know for my 75.5mm bore the gasket for 75mm wasn't too small. There was quite a bit of room for maybe up to 76 or 76.5... if the sleeves could sustain it which they can't.

turbohf

03-12-2007 10:25 PM

Re: HEAD GASKET

Honda headgaskets are good for oversized pistons... ever notice that Honda lists a oversized piston but not a oversized headgasket ;)

SkunT

03-12-2007 10:35 PM

Re: HEAD GASKET

ahh...ok. So a 81mm then will be just fine.

I went to hap and they have 2 head gaskets listed, thats why i asked...

All times are GMT -5. The time now is 12:14 AM.