H22a civic swap help
 

Ok im going to say this now, please don't post if your going to flame thanks!

allright down to buisness

I just got a good job so i can finnaly start a project car. What i plan on doing is getting a 92-95 Civic hatch and doing a H22a swap, Im just wondering thoughts on this and what turbo i should get, what size downpipe, ect... since this will be my first project any help will be thanked. but i wont be starting this probally untill next summer, so i can get a good amount of money in the bank to start it.

Re: H22a civic swap help
 

H22 swaps suck better a b-series or a d-series.

Re: H22a civic swap help
 

+1

Re: H22a civic swap help
 

all right lets go this way, what engine do you guys think? looken for DOHC Vtec

Re: H22a civic swap help
 

Use what you have.....add boost

Re: H22a civic swap help
 

Pushover.

He plans on building the engine, as in sleeved/pistons/rods/headwork + turbo.

I think h22 or b18c* would work best.

Re: H22a civic swap help
 

Yes, its mostly going to be used for track, and once in awile bring it out to street for some runs. H22as are good engine and fairly cheap

Re: H22a civic swap help
 

b-series are better and so are d-series or like said before just boost whatever you have until it blows up.

Re: H22a civic swap help
 

Speak when you have a little bit of a clue as to what you are talking about. :1

Re: H22a civic swap help
 

if you want a real setup get a jdm b18c1 (GSR) swap with lsd (limited slip) put pistons and rods in it and a big turbo, if your a baller rock a gt35r, 3 inch exhaust, ram horn or top mount, big intercooler and 20 psi with a really good tune. That setup will put down way more then you will plant to the ground. h22's are for suckers.