gsr crx runs!!! but stuck in limp mode :(
#1
gsr crx runs!!! but stuck in limp mode :(
solid cel that doesnt do ---- even when i jump the 2 wires from the xenocron obd0 to 1 conversion (blue and orange iirc)
everything is wired up for the car except the o2 sensor...
map sensor verified working stock and all wiring correct
tps maybe off but idt it would cause the car to go into limp mode...
disabled o2 sensor aka o2 heater off and closed loop still limp mode
im stomped
running on neptune rtp.. god damn it i need someone to make me a tuned p72 calibration file i can upload.. im sick of running pig rich.. i adjusted it and it helped but its still running pig rich.. ah well..
teaser pics of car
everything is wired up for the car except the o2 sensor...
map sensor verified working stock and all wiring correct
tps maybe off but idt it would cause the car to go into limp mode...
disabled o2 sensor aka o2 heater off and closed loop still limp mode
im stomped
running on neptune rtp.. god damn it i need someone to make me a tuned p72 calibration file i can upload.. im sick of running pig rich.. i adjusted it and it helped but its still running pig rich.. ah well..
teaser pics of car
#2
Re: gsr crx runs!!! but stuck in limp mode :(
Are all the grounds hooked up on the car. Specially the on for the ecu on the thermostat housing. I guess check any other ground. It could also be a solid CEL which is bad ECU. First, I'd contact Chris Harris
#3
Re: gsr crx runs!!! but stuck in limp mode :(
Originally Posted by boostedhfrex
Are all the grounds hooked up on the car. Specially the on for the ecu on the thermostat housing. I guess check any other ground. It could also be a solid CEL which is bad ECU. First, I'd contact Chris Harris
yup check that ground for sure
#4
Re: gsr crx runs!!! but stuck in limp mode :(
i just checked all the grounds.. when i took the ground off the car wouldnt start.. cleaned it up ground it down and retightend it.. i dont have a thermostat housing ground anymore..
i dont want to ---- with the ecu or anything arround it haha 600 bucks no thanks...
does the ecu get grounded when its bolted to the ground? because right now i have it on the floor..
i dont want to ---- with the ecu or anything arround it haha 600 bucks no thanks...
does the ecu get grounded when its bolted to the ground? because right now i have it on the floor..