got the pulley bolt off, here's the old pump. engine is fubar
 

i gotta change my oil pump, and like most import pumps its behind the damper pulley. how do i safely lock the ---- up? can i just feed rope into the plug hole, remove the cam, and just start wrenching on it? i want to hydrolock it, but my dad says no, i'm gonna snap rings and ----... rope seems like the best option

filled #1 cyl with some rope, worked like a charm.

http://img.photobucket.com/albums/v3...x/oilpump1.jpg
http://img.photobucket.com/albums/v3...x/oilpump2.jpg

has some surface rust like it sat on a shelf with no dessicant paper, and not in a bag for a while. also looks like it was never primed properly

well, turns out that my timing cover has a crack behind the water pump, it was pryed NOT BY MEfrom the engine with a chisel that took a huge chip out of the oil feed to the crank/head, so i was pissing oil/coolant slush all over my inner fender. while running, before oil/water mix, my rod bearings are all apparently fucked.

woohoo! noose time :X

Re: removing crank pulley bolt on a 22r, how the fuck do i lock the crank still?
 

A good impact works wonders.

Re: removing crank pulley bolt on a 22r, how the fuck do i lock the crank still?
 

I always lock the flywhel but if the motoris in the car thats a problem

Re: removing crank pulley bolt on a 22r, how the fuck do i lock the crank still?
 

You can use rope, it works good and wont wreck anything. I would make sure its on its compresson stroke so no valves would be open, just in case.

Re: removing crank pulley bolt on a 22r, how the fuck do i lock the crank still?
 

im pulling the cam because im doing the timing chain too

Re: removing crank pulley bolt on a 22r, how the fuck do i lock the crank still?
 

piece of 2 by 4 jammed against the crank near the bolt
works wonders just dont jam it againt a journal

Re: removing crank pulley bolt on a 22r, how the fuck do i lock the crank still?
 

it's a 4x4 toyota. i'm not pulling the motor to pull the pan to break one bolt to remove something that doesn't need an engine removal

Re: got the pulley bolt off, here's the old pump. engine is fubar
 

Time to find another good block and start over.

Re: got the pulley bolt off, here's the old pump. engine is fubar
 

nono, you don't just find 22r blocks anymore. the 16yo faggots that throw 6" lifts and 31" tires on them redline them all and ---- the blocks up, or destroy the internals with a honda like redline, then scrap the block, and repeat the next month

Re: got the pulley bolt off, here's the old pump. engine is fubar
 

or, you roll the fucker over and crush the cab :-[

dont be like me, kids