ghetto rebuild
#1
ghetto rebuild
i have a spare engineD15b2 and i was thinking o just honing& re-ringing it with new bearings,water pump& high quality head gasket should this be ok for a ghetto bottom-end rebuild before i add the turbo (iget these motors for free because everyone wants a twin-cam motor )
and will a 1st gen integra rotating assembely (pistons rods &crank) fit a 1.5 they have the same bore
and will a 1st gen integra rotating assembely (pistons rods &crank) fit a 1.5 they have the same bore
#2
Re:ghetto rebuild
its always nice to have a "new" bottom end, but the problem lies in the strength of the d15 bottom, those rods love to snap :P
as for the 88-89 teg rods and pistons, i know they fit in the a6 with minor adjustments. I think the stroke in the 1gteg is a lot longer than the d15. hopefully someone else will set ya straight...
as for the 88-89 teg rods and pistons, i know they fit in the a6 with minor adjustments. I think the stroke in the 1gteg is a lot longer than the d15. hopefully someone else will set ya straight...
Thread
Thread Starter
Forum
Replies
Last Post
typert
General Discussion
11
04-06-2005 07:18 PM
Semnos
General Discussion
18
03-16-2004 08:18 PM
Semnos
General Discussion
18
03-16-2004 01:54 PM