HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Hybrid/Tech (https://www.homemadeturbo.com/hybrid-tech-8/)
-   -   Fucking transaxle fill bolt! (https://www.homemadeturbo.com/hybrid-tech-8/fucking-transaxle-fill-bolt-85909/)

Secondaries 11-13-2007 06:59 PM

Fucking transaxle fill bolt!
 
I can't get this god damn bolt off. It's rounded off from past idiots, and vice grips are proving fruitless. I NEED my car to be running by tomorrow, so someone please give me some advice.

ryan89crx 11-13-2007 07:17 PM

Re: Fucking transaxle fill bolt!
 
---- it. pull the reverse switch out, grab a funnel, and pour 2.x qts of oil in there.

Guy-Fast 11-13-2007 07:19 PM

Re: Fucking transaxle fill bolt!
 
also can do the vss

Secondaries 11-13-2007 07:32 PM

Re: Fucking transaxle fill bolt!
 

Originally Posted by chris
also can do the vss

This is an old '87 Prelude Does the speedometer cable opening go all the way into the transaxle or is it just a closed tube with a rotating part inside?

klyph 11-13-2007 07:43 PM

Re: Fucking transaxle fill bolt!
 
Weld an old wrench to it and beat that bitch with a hammer :6

Secondaries 11-13-2007 08:35 PM

Re: Fucking transaxle fill bolt!
 

Originally Posted by klyph
Weld an old wrench to it and beat that bitch with a hammer :6

Haha, that'd work to get it loose, but how to get it the rest of the way off? The wrench wouldn't be able to make a complete rotation.

I'm leaning towards trying to see if the speedo cable hole or the reverse switch will work.

LilWayne 11-13-2007 09:11 PM

Re: Fucking transaxle fill bolt!
 
tap a smaller closed end wrench on to crack it then take the wrench off and replace old bolt

ryan89crx 11-13-2007 10:28 PM

Re: Fucking transaxle fill bolt!
 

Originally Posted by Secondaries
Haha, that'd work to get it loose, but how to get it the rest of the way off? The wrench wouldn't be able to make a complete rotation.

I'm leaning towards trying to see if the speedo cable hole or the reverse switch will work.

i have done the reverse switch myself. its actually much easier than trying to get oil in the fill hole, especially if you dont have a pump. the VSS will be a larger hole, and will work fine as well.

Hellbert 11-13-2007 10:44 PM

Re: Fucking transaxle fill bolt!
 
tiny pipe wrenches work great...rip the vss out and start dumpin

Secondaries 11-13-2007 11:08 PM

Re: Fucking transaxle fill bolt!
 
Is there a difference between electrical and cable-driven VSS though? Do they both lead into the transaxle or will I just pour oil all over the case if I try on my cable speedo trans?


All times are GMT -5. The time now is 10:23 PM.


© 2024 MH Sub I, LLC dba Internet Brands