Fucking transaxle fill bolt!
I can't get this god damn bolt off. It's rounded off from past idiots, and vice grips are proving fruitless. I NEED my car to be running by tomorrow, so someone please give me some advice.
|
Re: Fucking transaxle fill bolt!
---- it. pull the reverse switch out, grab a funnel, and pour 2.x qts of oil in there.
|
Re: Fucking transaxle fill bolt!
also can do the vss
|
Re: Fucking transaxle fill bolt!
Originally Posted by chris
also can do the vss
|
Re: Fucking transaxle fill bolt!
Weld an old wrench to it and beat that bitch with a hammer :6
|
Re: Fucking transaxle fill bolt!
Originally Posted by klyph
Weld an old wrench to it and beat that bitch with a hammer :6
I'm leaning towards trying to see if the speedo cable hole or the reverse switch will work. |
Re: Fucking transaxle fill bolt!
tap a smaller closed end wrench on to crack it then take the wrench off and replace old bolt
|
Re: Fucking transaxle fill bolt!
Originally Posted by Secondaries
Haha, that'd work to get it loose, but how to get it the rest of the way off? The wrench wouldn't be able to make a complete rotation.
I'm leaning towards trying to see if the speedo cable hole or the reverse switch will work. |
Re: Fucking transaxle fill bolt!
tiny pipe wrenches work great...rip the vss out and start dumpin
|
Re: Fucking transaxle fill bolt!
Is there a difference between electrical and cable-driven VSS though? Do they both lead into the transaxle or will I just pour oil all over the case if I try on my cable speedo trans?
|
Re: Fucking transaxle fill bolt!
there is this gangster ass bolt down on the side of it...you gotta take that sum bitch out then pull the whole mabobber out then WHAMO big ol hole and dump that ---- in
|
Re: Fucking transaxle fill bolt!
the vss leads into the trans
|
Re: Fucking transaxle fill bolt!
for some reason i get the idea that he was asking if he poured the fluid down in the hole that the actually speedo cable goes in.....idk...maybe not...
|
Re: Fucking transaxle fill bolt!
Yeah, I was, genius. That's what was suggested. If you had taken the time to read the first post, you'd realize I CAN'T take that gangster ass bolt out. Whoa-bang, trick.
|
Re: Fucking transaxle fill bolt!
I see where I went wrong. Nevermind, I get what to do now. Thanks.
|
Re: Fucking transaxle fill bolt!
lefty loosey, righty tighty?
|
Re: Fucking transaxle fill bolt!
get some of the stripped head bolt remover sockets. vatozone sells a set for like $20, along with any other place that sells tools. The are made to cut into the rounded head and lock onto it. Works wonders, and you know you'll use them again. Only bitch is separating the bolt and the socket later
|
Re: Fucking transaxle fill bolt!
Originally Posted by Hellbert
for some reason i get the idea that he was asking if he poured the fluid down in the hole that the actually speedo cable goes in.....idk...maybe not...
no you remove the whole vss its pretty big and allows easy access to the trans to fill fluid. Nice and easy not on your back. Just starting doing that I spent years filling it in the filling oil no moe. |
Re: Fucking transaxle fill bolt!
cable drive speedo, 20 years old, It's not coming out.
88-2000 D series trannys, you can remove the starter and fill thru shift cross shaft access plug hole. 19mm 6 point socket needed |
Re: Fucking transaxle fill bolt!
I would concentrate on getting the filler hole bolt out...
|
Re: Fucking transaxle fill bolt!
Originally Posted by chris
no you remove the whole vss its pretty big and allows easy access to the trans to fill fluid. Nice and easy not on your back. Just starting doing that I spent years filling it in the filling oil no moe. |
Re: Fucking transaxle fill bolt!
Originally Posted by Mista Bone
cable drive speedo, 20 years old, It's not coming out.
88-2000 D series trannys, you can remove the starter and fill thru shift cross shaft access plug hole. 19mm 6 point socket needed |
Re: Fucking transaxle fill bolt!
Well, on further inspection, I did get it all the way in. Did I nick the oil seal surface or something on the transmission? Any way to fix this?
I guess now I'm replacing the oil seal around the axle. ----. |
Re: Fucking transaxle fill bolt!
yeah replace the seal around the axle. i was going to tell you to weld an old wrench to it then after its loose use a cutting wheel to cut the wrench at the base of the head. looks like you already got it.
|
Re: Fucking transaxle fill bolt!
Originally Posted by Secondaries
Well, on further inspection, I did get it all the way in. Did I nick the oil seal surface or something on the transmission? Any way to fix this?
I guess now I'm replacing the oil seal around the axle. ----. |
Re: Fucking transaxle fill bolt!
"nicking" the seal means you knocked the spring loose of off the seal.
I will only run Honda seals, seen too many others leak. I'd post a pic, but photofuckit is down for maintaintass. |
Re: Fucking transaxle fill bolt!
Originally Posted by rsmith2786
Did the same. Frustrating. Autozone stocks the seal and it was around $5.
Mista Bone, can I just pull the old seal and reinstall it then? Or did knocking the spring loose permanently destroy its sealing capability? |
Re: Fucking transaxle fill bolt!
you'll ruin the seal pulling it out.
|
Re: Fucking transaxle fill bolt!
Originally Posted by Mista Bone
you'll ruin the seal pulling it out.
under $10 for either side....... |
Re: Fucking transaxle fill bolt!
Hey bone, I had a question about the seals:
Do you tap em in until they stop, or until they're flush with the case? |
Re: Fucking transaxle fill bolt!
how you do you family?
Outer edge flush. |
Re: Fucking transaxle fill bolt!
:y Thanks man
|
Re: Fucking transaxle fill bolt!
Originally Posted by Secondaries
Haha, that'd work to get it loose, but how to get it the rest of the way off? The wrench wouldn't be able to make a complete rotation.
I'm leaning towards trying to see if the speedo cable hole or the reverse switch will work.
Originally Posted by RotaryGeek
yeah replace the seal around the axle. i was going to tell you to weld an old wrench to it then after its loose use a cutting wheel to cut the wrench at the base of the head. looks like you already got it.
Welding a wrench to a bolt is a retarded idea. Just weld an old nut on top of the bolt. Put a socket on the nut. Voila. |
All times are GMT -5. The time now is 07:11 PM. |
© 2024 MH Sub I, LLC dba Internet Brands