Hybrid/Tech B16 / B18 / ZC / D16 / H22 / Mini-Me Ask your Honda Engine Questions here.

------- CLUTCH!

Thread Tools
 
Search this Thread
 
Old Jun 28, 2005 | 03:21 PM
  #1  
DCSkater0182's Avatar
Thread Starter
0.0 BAR
 
Joined: Jan 2005
Posts: 33
Default ------- CLUTCH!

So what can make a clutch slip I put in a clutch about five months ago..and the master cylinder broke so i got a new one... whenever i drive my Honda Civic D16z6 with the DX tranny....for long periods of time or it is hot outside..the clutch slipps and it can hardly drive... I then went to LSD motorsports.com and got a 6 puck..with 8lb flywheel..and after installation...drove it abou t 6 miles and it started slipping again! so i brought it back and got a lucas clutch and it still slipps.... what could be the problem? master or slave cylinder?? I dont know!
Old Jun 28, 2005 | 03:59 PM
  #2  
jinjur's Avatar
0.0 BAR
 
Joined: May 2005
Posts: 25
Default Re: ------- CLUTCH!

could it be a prublem with your flywheel............was the surface damaged by any previous clutches etc?
Old Jun 28, 2005 | 04:19 PM
  #3  
DCSkater0182's Avatar
Thread Starter
0.0 BAR
 
Joined: Jan 2005
Posts: 33
Default Re: ------- CLUTCH!

It was a new 8lb flywheel...when the 6 puck was installed...it made semi-deep rivits where it looked like only the outside was gripping...so i ordered this flywheel "ring" kinda thing from LSD motorsports...u unscrew all the screws on the flywheel and put this circular plate on it...and it is good as new... sorry but it is hard to explain the part that goes onto the flywheel.
Old Jun 28, 2005 | 04:53 PM
  #4  
LSD Motorsports's Avatar
Banned
 
Joined: Aug 2003
Posts: 2,898
Default Re: ------- CLUTCH!

Yes, it was the Flywheel insert that you purchased. I talked to a few people about this and they seemed to agree that something is wrong with your pressure system. Is anything loose on the Hydraulic line? Like where its bolted up/down. Be sure to see whats going on with the slave cylinder man. Good luck
Old Jun 28, 2005 | 06:01 PM
  #5  
SpankedYA!'s Avatar
0.0 BAR
 
Joined: Mar 2004
Posts: 0
Default Re: ------- CLUTCH!

Flywheel stepping the is the problem.
Old Jun 28, 2005 | 07:43 PM
  #6  
95RedEX's Avatar
1.5 BAR
 
Joined: Aug 2004
Posts: 948
Default Re: ------- CLUTCH!

I just got a new Fidenza friction ring and a 6 puck clutch from LSD.

Pedal takes some getting used to, but it works awesome so far!

Maybe you don't know how to install a clutch properly? :P
Old Jun 29, 2005 | 10:08 PM
  #7  
DCSkater0182's Avatar
Thread Starter
0.0 BAR
 
Joined: Jan 2005
Posts: 33
Default Re: ------- CLUTCH!

Thanks for the help guys, appreciated much...im gonna check all this stuff out tomorrow.
Old Jun 29, 2005 | 10:20 PM
  #8  
Donald125's Avatar
3.0 BAR
 
Joined: May 2003
Posts: 6,276
Default Re: ------- CLUTCH!

does the disc/flywheel looks overheated? (rainbow color )

also, no offense but how long have u been driving manuals

similar problem happened to a friend of mine, he`s a manual noob so i told him to take me out in his car.
and what happened is that he rest his foot at the pedal, he`s not pushing it but the clutch just disengaue a little bit and caused it to over heat.

Old Jun 29, 2005 | 11:03 PM
  #9  
DCSkater0182's Avatar
Thread Starter
0.0 BAR
 
Joined: Jan 2005
Posts: 33
Default Re: ------- CLUTCH!

Actually...when i took out my exedy stage II clutch..boo it was a rainbow color...i knew heat did this... ive been driving a manual for 3 years...so yea maybe it is possibly me... i do seem to keep my foot resting on the pedal at all times... shitty.

Old Jun 29, 2005 | 11:46 PM
  #10  
Donald125's Avatar
3.0 BAR
 
Joined: May 2003
Posts: 6,276
Default Re: ------- CLUTCH!

Originally Posted by DCSkater0182
..i do seem to keep my foot resting on the pedal at all times...
**Ding Ding Ding** we got a winner

so it is not the clutch nor the flywheel, it is YOU




All times are GMT -5. The time now is 02:54 PM.