Forged rods wont fit!!! help!!

Reply Subscribe

Thread Tools

Search this Thread

Oct 12, 2006 | 03:55 PM

#11

Zeniceguycrx

3.0 BAR

Joined: Feb 2006

Posts: 3,905

Re: Forged rods wont fit!!! help!!

so what rods are u using

Oct 12, 2006 | 04:00 PM

#12

HondaTuner

0.0 BAR

Joined: Dec 2003

Posts: 0

Re: Forged rods wont fit!!! help!!

Quote:

Originally Posted by Zeniceguycrx

so what rods are u using

Quote:

Originally Posted by d16y7sleeper

here is the ink to the auction

http://cgi.ebay.com/ebaymotors/ws/eB...m=200025689505

one rod fits into cylinder #4 but catches about 3 inches down. the rest of the rods catch in the first 1/2 inch.

dee dee dee

Oct 12, 2006 | 04:17 PM

#13

Walter

3.0 BAR

Joined: Apr 2006

Posts: 2,057

Re: Forged rods wont fit!!! help!!

Quote:

Originally Posted by d16y7sleeper

It wasnt the oil pump. It was my own stupidity because i didnt realize the gasket from my oil dump tube was leaking and the idiot light wire got disconected somehow. The oil pump seemed fine but i took it apart, cleaned it out and rebuilt it anyways just to be safe.

so you fixed it? only for gasket?

Oct 12, 2006 | 04:32 PM

#14

d16y7sleeper

Thread Starter

0.0 BAR

Joined: Oct 2006

Posts: 9

Re: Forged rods wont fit!!! help!!

replaced the gasket and all gaskets on the motor. just need to figure out the solution to the problem w/ the rods and I can put it back together.

Oct 12, 2006 | 07:04 PM

#15

HMTguy

Guest

Posts: n/a

Re: Forged rods wont fit!!! help!!

Quote:

Originally Posted by Walter

if them wont good then them arent correct rods for you engine..

Nice

Oct 12, 2006 | 07:11 PM

#16

FooK

3.0 BAR

Joined: Apr 2004

Posts: 9,779

Re: Forged rods wont fit!!! help!!

this happened with the tunertoys rods too, the first batch they had made wouldnt fit in the cylinder, they had to change the design, return them, and buy a TT set.

Oct 12, 2006 | 07:29 PM

#17

ryan89crx

3.0 BAR

Joined: Dec 2004

Posts: 1,976

Re: Forged rods wont fit!!! help!!

the auction shows 5290 on the side of the rod...is that what yours say? because that would be .104" too short for a 1.6....

Oct 12, 2006 | 07:32 PM

#18

SpankedYA!

0.0 BAR

Joined: Mar 2004

Posts: 0

Re: Forged rods wont fit!!! help!!

If the rod goes down 3 inches and THEN gets stuck you have an egg shaped cylinder. Please try again.

Oct 12, 2006 | 08:15 PM

#19

drunkinmaster1

1.5 BAR

Joined: Oct 2005

Posts: 1,276

Re: Forged rods wont fit!!! help!!

alot of those rods come from the same chinese manufacturer as the tt rods. my tt rods had to be shaved a cunthair each side to fit down the cylinder wallls.