HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Hybrid/Tech (https://www.homemadeturbo.com/hybrid-tech-8/)
-   -   Flywheel question (https://www.homemadeturbo.com/hybrid-tech-8/flywheel-question-90609/)

TorganFM 03-31-2008 04:37 PM

Flywheel question
 
A D16A6 flywheel will work with a D15B7... right? I'm going to be using a cable trans for the record.

Bone1 03-31-2008 05:49 PM

Re: Flywheel question
 
what year?

TorganFM 03-31-2008 06:07 PM

Re: Flywheel question
 
89 (I'm assuming) flywheel 94 engine

flywheel link: https://www.homemadeturbo.com/forum/...?topic=91003.0

Bone1 03-31-2008 10:36 PM

Re: Flywheel question
 
what EXACTLY are you doing,

all D flywheels interchange, clutches/pp do not.


TorganFM 03-31-2008 11:05 PM

Re: Flywheel question
 
I'm considering either bolting a cable transmission and appropriate clutch to either my stock B7 or my built Z6 and putting that into a CRX with an OBD1 ecu and a replugged wire harness.

So if flywheel doesn't matter than I can use an A6 wheel on a OBD1 motor.

Guy-Fast 03-31-2008 11:15 PM

Re: Flywheel question
 
cable l3 transmissions dont have the same spline

TorganFM 04-01-2008 01:38 AM

Re: Flywheel question
 
I'll match the clutch disk to the transmission, that should take car of it, right?

Bone1 04-01-2008 03:31 AM

Re: Flywheel question
 
IF you have a complete 89 fly/disc/pp setup, you'll be fine with any 89-2000 tranny.

You'd be better off using a 90-2000 fly/disc/pp setup though.


All times are GMT -5. The time now is 01:38 PM.


© 2024 MH Sub I, LLC dba Internet Brands