TorganFM

A D16A6 flywheel will work with a D15B7... right? I'm going to be using a cable trans for the record.

Bone1

what year?

TorganFM

89 (I'm assuming) flywheel 94 engine

flywheel link: https://www.homemadeturbo.com/forum/...?topic=91003.0

Bone1

what EXACTLY are you doing,

all D flywheels interchange, clutches/pp do not.

TorganFM

I'm considering either bolting a cable transmission and appropriate clutch to either my stock B7 or my built Z6 and putting that into a CRX with an OBD1 ecu and a replugged wire harness.

So if flywheel doesn't matter than I can use an A6 wheel on a OBD1 motor.

Guy-Fast

cable l3 transmissions dont have the same spline

TorganFM

I'll match the clutch disk to the transmission, that should take car of it, right?

Bone1

IF you have a complete 89 fly/disc/pp setup, you'll be fine with any 89-2000 tranny.

You'd be better off using a 90-2000 fly/disc/pp setup though.