fix this motor or swap?
09-21-2004, 07:19 PM
#1
0.5 BAR
Thread Starter
Join Date: Sep 2004
Posts: 67
fix this motor or swap?
fix my d series non vtec and hope i can cure all the cel's and pass emmisions and finish my interior , or swap it out for a vtec d series , alarm it and start piecing together a kit? note: either way the motor will end up turboed its just a matter of time so please dont base your decision on that
i have tossed about with this idea for a month now and really need to decide so a little influence would be great , thanks
i have tossed about with this idea for a month now and really need to decide so a little influence would be great , thanks
09-22-2004, 01:48 AM
#3
1.5 BAR
Join Date: Jul 2004
Posts: 1,437
Re:fix this motor or swap?
what CEL codes are you getting?
which block is it? d16a6 / d16y7 or what?
depends on what the CEL lights are and some other ----, like compression test and ---- like that. If the compression is good then don't worry aobu tit and chances are that most of the other CEL lights can be fixed easily.
which block is it? d16a6 / d16y7 or what?
depends on what the CEL lights are and some other ----, like compression test and ---- like that. If the compression is good then don't worry aobu tit and chances are that most of the other CEL lights can be fixed easily.
09-22-2004, 07:10 AM
#4
0.0 BAR
Join Date: Apr 2004
Posts: 0
Re:fix this motor or swap?
JDM D15 Vtec.
you can get one $400+shipping or usally around $500 at your local shop. (at 3 different shops i have found them between 475-525) probably the cheapest D series you are gonna find, its jdm, and it only has under 40K miles on it. People are making some decent numbers on these to. give it a thought.
you can get one $400+shipping or usally around $500 at your local shop. (at 3 different shops i have found them between 475-525) probably the cheapest D series you are gonna find, its jdm, and it only has under 40K miles on it. People are making some decent numbers on these to. give it a thought.
09-22-2004, 12:41 PM
#6
1.5 BAR
Join Date: Jul 2004
Posts: 1,437
Re:fix this motor or swap?
You must have the d15b2 which is like 90hp.
the jdm d15 is a vtec head with a little bit stronger rods i believe. the jdm d15 is like 130hp.
where are you located at in wisconsin?
You would honestly be better off getting a cheap 1.6l block and building that and putting a z6 or y8 head on it and then boosting it.
the d15's have fucked up rod bearing sizes and you can't really get aftermarket rods for them. the extra .1 liter of displacement will also make up for more power after you add boost
you can pickup a full d16a6 for like $250 (110hp) then put a z6 head on it and be at like 130-140hp. add a diff vtec cam and you'll gain 15hp along with a few other things you can be right around 150hp (crank) then start boost it and you'll be right around 200whp on stock internals. change the internals and you have lots of options (300whp)
the jdm d15 is a vtec head with a little bit stronger rods i believe. the jdm d15 is like 130hp.
where are you located at in wisconsin?
You would honestly be better off getting a cheap 1.6l block and building that and putting a z6 or y8 head on it and then boosting it.
the d15's have fucked up rod bearing sizes and you can't really get aftermarket rods for them. the extra .1 liter of displacement will also make up for more power after you add boost
you can pickup a full d16a6 for like $250 (110hp) then put a z6 head on it and be at like 130-140hp. add a diff vtec cam and you'll gain 15hp along with a few other things you can be right around 150hp (crank) then start boost it and you'll be right around 200whp on stock internals. change the internals and you have lots of options (300whp)
09-22-2004, 01:20 PM
#7
0.5 BAR
Thread Starter
Join Date: Sep 2004
Posts: 67
Re:fix this motor or swap?
well here is the situation, my current motor needs a new intake mani , fuel rail with injectors and regulator , and throttle body, possibly a new iac, so its either fix that and get back into paintball , or swap a motor and start pieicin together my kit so idk what to do
09-22-2004, 02:05 PM
#8
0.0 BAR
Join Date: Dec 2002
Posts: 0
Re:fix this motor or swap?
What car is this for. Also remember that the cost is just motor. Then you add a new clutch I would go aftermarket. Need something to run the vtec being a vtec ecu,controller or the ghetto way rpm switch. Then most likely if it's an older car w/ mileage you will run into more issues w/ needing parts. I have yet to do a swap and spent what I thought it would cost.
09-22-2004, 05:49 PM
#10
1.5 BAR
Join Date: Jul 2004
Posts: 1,437
Re:fix this motor or swap?
WHERE IN WISCONSIN ARE YOU FROM?
I have a d16a6 throttle body with everything on it, that you can have, it is sitting behind my garage. I'm sure it will fit your application, otherwise I am buying a 88-89 4dr civic that has the dpfi ---- on it and you can have that intake ----.
I have a d16a6 throttle body with everything on it, that you can have, it is sitting behind my garage. I'm sure it will fit your application, otherwise I am buying a 88-89 4dr civic that has the dpfi ---- on it and you can have that intake ----.
